Eibach 3 Inch Lift Coils and rough Country Struts

[73Duster440]

Hey Guys,
I am trying to figure out if I can run this set up together without issue
I have searched and searched and only found one thread that was quite a few years old and was no help
Wont be doing any major wheeling just going camping and trail riding and using it as my DD

Rough Country N2.0 Front Struts
Rough Country N2.0 Front Strut Set

Eibach 3 Inch Lift Coils
Toytec / Eibach Front Coil Lift Springs


I also picked up a set of LC Coils
19.5" Purple Green White
19' Double Purple light blue White

Will these work with them: Rough Country N2.0 Rear Shocks
Rough Country N2.0 Rear Shock Set for 4Runner

Thanks for any info

 

[Talltoys]

RC. N2O shocks

I don't know if the fronts will works with the Eibachs but the rears work great with the LC springs. I have runs this setup for a couple years. Flexes like hell. The N2O have about 9.5" of travel. Seems to be the most I've found. The oem LC shocks are only 8.75". I run the 3" Eibachs up front but on Tundra bilsteins. I know Wheelers off-road sells N2O' s. Maybe ask them.
Rod

 

[73Duster440]

Ok so after never hearing back from the emails I sent to Wheelers Off-road, Toytec and others over a week ago I decided to call around. Spoke with Mike at Toytec and Dave at Wheelers.
From what I have gathered speaking to these vendors is these front strut will indeed work with the 3 inch Toytec coils.

So with this information I have made the decision of what parts I will use for my setup

Up Front: Rough Country N2.0 Front Struts paired with Eibach 3 Inch Lift Coils

Out Back: A set of LC Coils (19.5" Purple Green White/19'' Double Purple light blue White) Paired with a set of Rough Country N2.0 Rear Shocks

Is there anything I need to do to keep the rear coils from popping out?

Thanks for the info Talltoys