Eibach Pro-Truck Lift System (Stage 1) with a Toytec 1/4” spacer for driver side lean

[4Runnin4Fun]

After over an hour of searching I can’t find the exact answer I’m looking for. I purchased the Eibach Pro-Truck Lift System (Stage 1) for 2010+ 4Runner (E80-82-071-01-22) assembled and an waiting on it to come in the mail. I also ordered a 1/4” spacer from Toytec to help with the driver side lean. According to Toytec I don’t need longer studs. Since that is the case, does the spacer just sit on top of the three existing studs preventing me from having to compress and dissemble everything?


Sent from my iPhone using Tapatalk

 

[Miller1236]

Fits on top of your coilover assembly from Toytec web site

TP14 - Front Top Plate Spacer (One -1/4" thick spacer)

 

[4Runnin4Fun]

Fits on top of your coilover assembly from Toytec web site

TP14 - Front Top Plate Spacer (One -1/4" thick spacer)

So installation would look like this YouTube video? 16' 4runner cornfed .5" spacer install

 

[85GT-79FJ40]

It just sits between the strut mount and the frame. Easy peasy. I actually had to use 2 on mine and the 2 different size cornfed spacers on the back to make mine sit level. Same springs... I added 3/4" cornfeds in the rear with the eibachs because as it came it looked like it was sagging in the rear. And the cornfeds are left/right specific with one being a touch taller for the drivers side. mine's now dead level with 200 lb me in the driver's seat. Empty it's just a hair taller on the driver's side.