EightyHD 4Runner FTE Edition :D
- Thread starter eightyhd
- Start date
Register to hide this ad
eightyhd
New member
in the beginning......
$5800, 207k, 99 Limited 4x4.
Believe me ive got lots of work to do!
1. Suspension Lift, 3/3
2. Headlight Mod
3. Roof Rack
4. Bumpers & Winch
LOL! 207k miles, Granny had it!
Finally got mah lift kit installed.
3"front / 1.5 Rear (But going to 2.5 Rear because it sags)
Took me 9 hours by myself, tons of little tricks, and getting additional tools..... Lower Ball join was fun, BUT found a super EASY WAY! (Unscrew the 4 bolts.) Hydraulic jack was the key to this!
YES! I have 285-65r18 Nitto Terra Grapplers on there with 1" wheel spacers.
Super MINOR Rubbing only when turning, and can be trimmed!
Spacer: Torqued 100lbs
Wheels: 89 lbs.
Got to complete the F/R Differential drop tomorrow.:crybaby:
Pics:
Doing the Deck Plate Mod, K&N Filter and ECU Reset
Dreaming....
Stock!
Sag-a-licious
Photoshopped!
Done.
Last edited:
eightyhd
New member
Pre transformation:
But im getting a front bumper, with hoops, Winch mount, fog light mounts,
Custom Skid Plates
Rear Bumper, Tire mount, & License plate mount w/lights, tow hitch
Magnaflow muffler & Weld ($90 additional - Um yeah definitely getting that!)
Chad at XRF is hookin this up.
Anyone in AZ should hit him up. KILLER DEALS! Awesome Work!
But im getting a front bumper, with hoops, Winch mount, fog light mounts,
Custom Skid Plates
Rear Bumper, Tire mount, & License plate mount w/lights, tow hitch
Magnaflow muffler & Weld ($90 additional - Um yeah definitely getting that!)
Chad at XRF is hookin this up.
Anyone in AZ should hit him up. KILLER DEALS! Awesome Work!
Last edited:
theizzardking
New member
nice! welcome to the forum and looking forward to seeing your vision completed!:trophy:
eightyhd
New member
eightyhd
New member
Finally got my yota back!
Winch bumper, skid plates, rear bumper w/tire carrier.
License plate lights courtesy of eBay
Courtesy of Chad at Xcentrix Motorsports & Fabrication.
Theyre located in AZ, and gave me a killer deal!!
Winch bumper, skid plates, rear bumper w/tire carrier.
License plate lights courtesy of eBay
Courtesy of Chad at Xcentrix Motorsports & Fabrication.
Theyre located in AZ, and gave me a killer deal!!
Winch bumper, skid plates, rear bumper w/tire carrier.
License plate lights courtesy of eBay
Courtesy of Chad at Xcentrix Motorsports & Fabrication.
They're located in AZ, and gave me a killer deal!!
what kind of killer deal? more details please
eightyhd
New member
Satoshi Grill Mod on a 99-02 4Runner
So i bought the 96-98 model grill and found out they DONT fit on the 99, as i read this before.
But they do fit with some modifications.
Used a die grinder to shimmy down the bracket holders, and VOILA!
Worked like a charm!
Put the clips back in....
This suckiest part... fitting the mesh grill in.....
So i bought the 96-98 model grill and found out they DONT fit on the 99, as i read this before.
But they do fit with some modifications.
Used a die grinder to shimmy down the bracket holders, and VOILA!
Worked like a charm!
Put the clips back in....
This suckiest part... fitting the mesh grill in.....
eightyhd
New member
Like $1400, but i tipped them a $100
I paid for the lights, winch, and they did the rest.
This is to include the paint. Dont tell them i paid that much, it was a homey hookup!
SantaCruzRunner
Senior Member
Damn $1400 for all that?? thats sweeeet! looking forward to the build keep it up :hungry:
eightyhd
New member
Pics coming soon.
Last edited:
