energy suspension sway bar bushing and end link sizes?

jblazy18

New member
I was looking around the forums and just need a clear answer.. I have a 99 T4R SR5 4x4 and wanted to replace the stock sway bar bushings and end links with the energy suspension brand from autozone. What are the sizes for the front and rear sway bars so i know what size bushings to order to order?.. and what size end links would i need to replace the stock ones?... thanks guys!
 
Register to hide this ad
Just remove the sway bar and save the money for bigger mods. haha

Sorry i'm not sure but maybe try searching on eBay for the energy sway bar bushing kits, as I am sure they will state the bushing sizes in the description.

But seriously, throw the sway bar in the garbage.:reddance:
 
As far as the endlinks go, AZ lists an aftermarket that I used on my truck. The ball is not as stiff as OEM but it is pretty much identical otherwise. I'm pretty sure it was this one ($36.99):

Duralast/Sway Bar Repair Kit (SL3560) | 1999 Toyota 4 Runner 4WD 6 Cylinders N 3.4L EFI DOHC | AutoZone.com
2


It's been on there two years and 16k now.
 
Last edited:
thanks thedurk that helps me allot... i didnt even think of just searching my specific vehicle with stock parts on the az website.. i was just looking at performance parts
 
thanks thedurk that helps me allot... i didnt even think of just searching my specific vehicle with stock parts on the az website.. i was just looking at performance parts

They were about the only parts store that had one listed. I needed one on a Sunday to finish a weekend job. I know NAPA (my normal first choice) did not. They also have sway bar bushings--I don't know if they are rubber or polyurethane.

http://www.autozone.com/autozone/parts/Duralast-Sway-Bar-Bracket-Bushing/1999-Toyota-4-Runner-4WD/_/N-jdp7iZ8oxl9?counter=0&itemIdentifier=532106_15797_0_4145
 
Last edited:

Members online

Forum statistics

Threads
278,316
Messages
3,554,121
Members
248,016
Latest member
Advally Service

Trending content

Back
Top