extended brake line tips / tranny cooler

[Zachpins34]

I will be installing the extended rear brake line I got from toytec tomorrow. Any tips ? I haven't been able to find any write ups or much about it. Don't really know what I am getting into, besides that I will need to bleed the brakes. Anyone ever do this? I hope I didn't waste $30 because I don't see many people on here with extended lines. Also will be installing external tranny cooler tomorrow. Any help/tips appreciated!

 

[PitbullRescuer]

Both are very straight forward. But, if you're not sure what you're doing, DON'T MESS WITH YOUR BRAKE LINES! Can't stress that enough.

Tranny cooler is very easy. Use the old line to loop the cooler in the radiator. Run the new lines onto to hard lines coming out of the trans (just above the steering rack.). Mount the cooler and hook the lines up to it. Have a sharp blade handy to cut the old rubber lines and be careful removing your grill. Have a drain pan to catch the tranny fluid that'll come out of the lines and a quart or two of tranny fluid to top it off. You'll be done in less than an hour.

 

[Zachpins34]

thanks for the help, everything seems so simple AFTER I get it done lol. Didn't do the brake lines, but my brother will help me with it, and he knows what hes doing . I dont trust myself with that lol. thanks again man