Fender liner PDF?

[rrflyer]

Can anyone provide me with the PDF that was made for the fender splash shields?!

Thankyou

 

[Beater]

Can anyone provide me with the PDF that was made for the fender splash shields?!

Thankyou

http://www.toyota-4runner.org/4th-g...pieces-missing-front-driver-wheel-well-2.html

PDFs of the 4th Gen Fender Liners

https://app.box.com/s/g6bwh7c0h4c4cyybpdidpcu8ewp7ueo3

 

[Ohcrymore]

http://www.toyota-4runner.org/4th-g...pieces-missing-front-driver-wheel-well-2.html

Here are the part numbers and prices, courtesy of Greg from toyotapart.com

53735-35150 SEAL, FENDER $16.48 x 1
53886-35020 SEAL, FENDER $17.76 x 2
53736-35150 SEAL, FENDER $20.04 x 1

https://drive.google.com/open?id=0B1UzjUVpNb9jRWlLWVdkR0lydmRpRnpmdlNPMFZ6ZlNnRnNz

Let me know if the link for the pdf doesn't work.

These are for a 2003, but I would expect that the parts are standard through all 4th gens.

 

[rrflyer]

Thankyou guys!

 

[Slowgoat]

EDIT:

Just saw this, thanks [MENTION=120321]Beater[/MENTION]!

http://www.toyota-4runner.org/4th-g...pieces-missing-front-driver-wheel-well-2.html

https://app.box.com/s/g6bwh7c0h4c4cyybpdidpcu8ewp7ueo3


Here ya go!

 

[SoSoRunner]

What materials are you guys using for the liners?

 

[V8Man]

I used the belt off an old treadmill.

 

[Slowgoat]

What materials are you guys using for the liners?

I used some oil resistant rubber from Grainger (worked great!):

GRAINGER APPROVED Rubber,Vinyl,1/8 In Thick,12 x 24 In - Rubber Sheets and Strips - 1MXU1|360-1/8B - Grainger Industrial Supply


"Oil-resistant Vinyl Rubber, Plain Back, 1/8" Thk, 12" X 24", 80a Durometer "

Part number on grainger.com is: 1MXU1

Some people cut up trash cans and some used trimable floor mats.

Seem my thread below:

http://www.toyota-4runner.org/4th-gen-t4rs/198245-pdfs-4th-gen-fender-liners.html

 

[Lowetony]

You could use the backing material from either an old carpeted cargo mat or welcome mat. It's thicker than the factory pieces!

 

[bcolts]

What materials are you guys using for the liners?

I used rubber shower liner from Home Depot. Was about $5 to do two sets. Been in place for a year now, no issues.

 

[Johnny4runner]

Looking at doing this also. What fasteners did everyone use? I have a couple that will need to be replaced.

Also did anyone have to make adjustments for a body lift?

Best, J4R

 

[SoSoRunner]

Looking at doing this also. What fasteners did everyone use? I have a couple that will need to be replaced.

Also did anyone have to make adjustments for a body lift?

Best, J4R

Yeah with the thicker materials are you guys still able to use the stock plastic push pins?