Finally getting my rear springs

[Falls]

The SAW's are finally in stock at Wheelers , or they were since I bought bought the last set . 1.5 " of rear lift . I can finally start putting this together , now all I need to do is see how my lower Toytec lift looks and if I'll need to go to the bigger 285 tires and what rims to get or maybe I'll have the stocks powder coated gloss or satin black .

Hopefully I will leave the front CO's at the factory setting of 2.5 or set them at 2.5" and just tweek side to side to get rid of the lean and be done with it. I should have about 1" of rake which will work out well for pulling my trailer.

If they get here in time hopefully put it on this weekend :bluejump:

 

[jakehere]

Dang I knew I should've ordered the rear SAW's today...

Please let us know how they work out, ride, lift...etc. I think we're in the same boat, I want 1.5" or less of rear lift and to stiffen it up for handling and so my trailer doesn't squat it 2" like it does now.

I'm not 100% sure on the front end maybe you could help me decide, my choices are: (trying to achieve a 2.5/1.5 lift).

1. 5100's at the 2.5" setting w/ oem springs.
2. 5100's with OME 884 Springs at the lowest setting on the bilsteins, should be about 2.75 cause the 5100's are longer than stock right?
3. OME 884 springs with OME shocks for 2.5"
4. OME 884 springs with bilstein HD shocks
5. OME 884 Springs with stock oem shocks
6. Some type of 2" coil-over (too much $$ tho)