FIPG for front axle tube at differential?

RidingDirty

New member
I'm certain that I'm overthinking this, but here we go. I'm doing a manual hub swap and ADD delete. I have a non-ADD axle tube that I'm going to install, but there is a little confusion on the correct FIPG that I am supposed to use. My FSM says part "08826-00090, Threebond 1281 or equivalent" and usually that would be the end of it. The problem is that this part 08826-00090 corresponds to FIPG (orange) for the transmission and there is another part number FIPG (black) which is for oil. Since this is for my front differential, than wouldn't I need the black FIPG? Also to add to the confusion there is a Threebond 1281 (gear oil) and 1281B (ATF). So can anyone give me some clarification on the correct FIPG?

Toyota Adhesive & Sealant Cross Reference Chart - YotaTech Forums

Silicone RTV Sealant | ThreeBond
 
Register to hide this ad
I would use permatex 81182. It’s FIPG meant for gear oil, and what I’ve always used for gear oil applications. I’m interested to see what Toyota/three bond people recommend for gear oil applications.
 
I believe three bond 1281 is reddish brown. Description: [Silicone FIPG, Gear oil resistant, heat resistant]

It's also the same color as 1281B [Used in Silicone FIPG, AT fluid resistant ]

I would use 1281 for the gear oil sealing and 1281B for the Transmission pans etc.
This is just my thoughts on it. :-)

I just found it interesting as its the same color as the factory FIPG. :-)
 
I believe three bond 1281 is reddish brown. Description: [Silicone FIPG, Gear oil resistant, heat resistant]

It's also the same color as 1281B [Used in Silicone FIPG, AT fluid resistant ]

I would use 1281 for the gear oil sealing and 1281B for the Transmission pans etc.
This is just my thoughts on it. :-)

I just found it interesting as its the same color as the factory FIPG. :-)

I used Permatex Black RTV on my actuator, and it seems to be holding almost a year and a half dozen wheeling trips later.
 
I used Permatex Black RTV on my actuator, and it seems to be holding almost a year and a half dozen wheeling trips later.
I am sure it will. As it's probably an equivalent. :) Lots of things should work well for many different mfgs. :)

Sent from my SM-A505U using Tapatalk
 
I don’t know the part number but the orange/red Toyota FIPG is a great product. Expensive but it’s the right stuff for gear oils from what I understand. Rule of thumb: black FIPG on engine oil/coolant. Red/orange FIPG on transmissions and diffs.

That has never steered me wrong.
 

Members online

No members online now.

Forum statistics

Threads
278,316
Messages
3,554,121
Members
248,016
Latest member
Advally Service

Trending content

Back
Top