FS: 3rd gen rear axle shafts - $50 local pick up los angeles

[s20004runner]

I have two rear axle shafts (w/ drums and brake parts)

I picked up an entire elocked rear end but decided to re-use my existing axle shafts.

$50 for one (incl shaft, drum, and drum parts) or $80 for both. OBO.

FYI, the bearings are little loose. you probably want to replace them.

local pick up only please.

 

[hugo2go]

What year are these axles off of?

 

[s20004runner]

What year are these axles off of?

the seller told me 2000 4x4

 

[hugo2go]

I have a 01 Sport 2wd.
Let me do some research and see if its compatible.

 

[s20004runner]

I have a 01 Sport 2wd.
Let me do some research and see if its compatible.

FYI, it comes w/ the skid (abs ring) so i pretty sure these are swappable. Also posted here so let see what others say.

http://www.toyota-4runner.org/3rd-g...e-shafts-assembly-fit-01-2wd.html#post2087035

let me know.

 

[hugo2go]

Last thing to check if it is compatible is the size of the drum brake booster.
Do you happen to know the size?

 

[HiLife]

Man been waiting for something like this to show up near my location.
OP, if I was near to your location :ballchain: it would be sold already.

 

[s20004runner]

Last thing to check if it is compatible is the size of the drum brake booster.
Do you happen to know the size?

no but I don't think 3rd gen 4runners used anything different from post abs to 2002 2wd or 4wd.

 

[hugo2go]

PM me your contact info

 

[s20004runner]

still available bump

 

[hugo2go]

Can you check if the wheel brake cylinder is a 7/8 size or 13/16 size.
My rig is a 7/8 since it came with factory 16 inch wheels.

 

[s20004runner]

Can you check if the wheel brake cylinder is a 7/8 size or 13/16 size.
My rig is a 7/8 since it came with factory 16 inch wheels.

here you go.

 

[s20004runner]

Man been waiting for something like this to show up near my location.
OP, if I was near to your location :ballchain: it would be sold already.

if i find a way to ship it, will you pay for shipping? pm me. thanks.

 

[hugo2go]

By wheel brake cylinder I mean this part

The size will be embossed on the part.

 

[s20004runner]

By wheel brake cylinder I mean this part



The size will be embossed on the part.

Yes, that is the close up pic of the cylinder. That part you are referring to.