FS: (4) sets of Dobinsons springs for 3rd gen 4R, Maryland

[162435]

I'm selling 4 sets (pairs) of Dobinsons springs. All were purchased through Leonard Molina at DobinsonsDirect.
After initially installing c59-276 (front) springs & c59-137v (rear) springs, I decided to try different ones. So the 276 & 137v springs have less than 20 miles on them from rolling around the neighborhood.
I then purchased and installed c59-134 (front) springs & c59-131 (rear) springs. These have been on the truck for about 4 months.
I paired all of these springs with Dobinsons IMS59-5022 (struts) & IMS59-50225 shocks (rear).

My initial plans for the truck included quite a bit of weight (RTT, front & rear plate bumpers, etc.). For one reason or another, plans changed and I've decided to keep the truck at its normal weight. So I settled on a Dobinsons / OME combination that works for me.

Other than normal chips/scratches from installing & removing, the coils have no damage, were never used off road, and never carried more weight than normal around-town amounts from family members or errand runs. After cleaning the springs, I applied labels to each one so as not to confuse part numbers.
I am selling these at a substantial loss, as they are otherwise just taking up room in my garage.

I will not make fitment recommendations - you are welcome to discuss applications with Mike @ Exit Offroad, or Leonard Molina @ DobinsonsDirect, or David Otero @ DobinsonsDirect. Additionally, both DobinsonsDirect & Exit Offroad give extensive info on their sites.

Lengths:
c59-276 (front): 14" SOLD
c59-134 (front): 14-3/8" SOLD
c59-131 (rear): 15-1/2" SOLD
c59-137v (rear): 16-1/4" SOLD

Current prices (pair) at DobinsonsDirect:
c59-276: $245 + shipping SOLD
c59-134: $245 + shipping SOLD
c59-131: $245 + shipping SOLD
c59-137v: $245 + shipping SOLD

I am selling each set/pair for $100 + actual shipping. If you are within a reasonable driving distance of Ellicott City, MD, I will consider meeting. Payment by PayPal only.
I've owned my '01 4Runner since new, and have been an active member of YotaTech for many years as 'aowRS'.


Andreas

 

[162435]

Bump for price drop!



Andreas

 

[Taylor20]

Highly interested in a front and rear pair, need my springs to sell and I’ll pm you.


Sent from my iPhone using Tapatalk

 

[162435]

Taylor,
Sounds good.


Andreas

 

[162435]

Bump.


Andreas

 

[162435]

Two sets of front springs left.



Andreas

 

[JoeT4R]

What struts did you have the c59-134 springs paired with? How did it perform as far as daily driving goes?

 

[162435]

What struts did you have the c59-134 springs paired with? How did it perform as far as daily driving goes?

Joe,
I paired all of these springs with Dobinsons IMS 59-5022 (struts) & IMS 59-50225 shocks (rear). I would describe the ride as firm, but very controlled.

As an aside, I will post a thread soon about the IMS shocks. After coming across JZiggy's thread that mentioned having the IMS shocks re-valved by Dobinsons, I contacted them and sent the four shocks out. They came back yesterday, I reinstalled everything, and then made a 3-hour drive to the beach very early this morning. It would be an understatement to say that the ride improvement is night & day. Absolutely comfortable, controlled, and smooth.

So, sadly, I probably would have been pleased with any of these springs had I known that Dobinsons revised their valving...

I think a 'normal' pairing for a fairly-stock 4Runner is c59-134 front & c59-131 rear.



Andreas

 

[162435]

Bump



Andreas

 

[162435]

Bump



Andreas

 

[garn79]

pm'd ..

 

[162435]

pm'd ..

Sent a text. For whatever reason, my reply does not show up in the Sent folder.



Andreas