FS: 4th (and 5th?) Gen OEM Rail Awning Mount - $40 shipped

[svana]

I’ve replaced my OEM rack and am selling the awning mounts I 3D printed for them. The triangular profile of the rails make it difficult to find a firm bolt-on solution. Installs flush to your OEM rack with a neoprene liner to not damage the rack while keeping the awning in place. I’ve included a slot in the back to fit a metal plate for added structural support, but they can be installed with just bolts and washers if desired. Includes 4-100mm M6 stainless bolts (only 2 shown in one picture). Asking $40 shipped to lower 48.

Note: if there’s a desire for a different color/profile/general modification, I’m happy to see if we can work on something.

 

[470SNC]

PM sent

 

[svana]

All PM’s replied to. Just finished a set for [MENTION=114145]470SNC[/MENTION], adjusted the hole spacing a bit to cater to his awning.

 

[470SNC]

BTW awning mount works perfectly on GX470 OEM roof rack rails as well!

 

[svana]

BTW awning mount works perfectly on GX470 OEM roof rack rails as well!

Hey Sang, just came across your post. Glad it all fit up nicely!

 

[rockieslvr20]

Are you still accepting order requests? If so, is it any extra to have it made in black?

 

[svana]

Are you still accepting order requests? If so, is it any extra to have it made in black?

Hey Rockie,
Yes I'm still making them, I'll send you a PM. Black is the same price.

 

[mikeatx]

I'd love a set in black if possible.

 

[svana]

I'd love a set in black if possible.

Sure, PM sent

 

[Vitty]

Can you PM me with the ordering details? I’ll need them In Black.

 

[meeksodorifto]

pm'd you Svana!

 

[*AZ4Runner*]

PM Sent Svana

 

[VUBAR]

Pm sent. Also interested in a set in black!

 

[JONBOY345]

PM Sent!

 

[hrjaw]

one set in black please and thank you.

Roger

 

[MRDEUCE]

Still making these? Very interested

 

[Akkording]

Do those bolts fit on the ebay Chinese awning? My buddy wants to borrow mine from time to time on his stock 5th gen rails.

 

[*AZ4Runner*]

Do those bolts fit on the ebay Chinese awning? My buddy wants to borrow mine from time to time on his stock 5th gen rails.

No unfortunately they dont. I bought these to use on my cheap awning and the track for mine needs a 13mm bolt and these are 10mm. and the holes dont align correctly. Not the makers fault I'm sure these were made based on the ARB dimensions. I bored the top hole to fit a 13mm bolt but I cant get the bottom bolt through as it wont align with the track and the holes on the mount. Not sure if I want to use it with just the top hole/bolt only. Still trying to come up with a solution on this one.

 

[broken wrench]

Pm sent

 

[MoonRakerSCM]

Hi there, I like your design and would like to know if you're still making them (ARB 2000 and 5th gen compatible?)?

I signed up just to ask, thanks!