FS: 5th Gen Part Out (Bajarack/Gobi/Pioneer/Bracket/Storage) Lou. KY

[SigSense]

Have a few items For Sale on T4Org: Full-Length Flat BajaRack for 5th Gen. Had this mounted on my T4R for about a year and half. Sold the 5th Gen and bought a Tacoma DCLB TRD 4X4. This has been sitting in my garage for months, as I have been overseas. It does NOT have the moonroof cut-out, as I had a SR5 with NO moonroof. $600. Rack is located in Louisville, KY. Will not ship due to size etc. Will help the buyer install it! Fun times, will even provide the beer. *I do not have PayPal, long story-short: They made a BAD business decision with me and I do not use their services since then. Best forms of payment are cash (the green kind), check, or USPS Money Order. Isn't that so old school?

Manufacturer info: Baja Rack

-Gobi Ladder for 5th Gen. Standard Gobi ladder, but had to grind down the top portion a bit due to it contacting the above left rear BajaRack (this is common). Then recoated with a black primer and undercoat material. No structural problems with it. $125. No Shipping. Will help buyer install it.

Manufacturer info: Gobi Racks - Hummer, Jeep, Toyota Racks

-Pioneer AVIC-Z140BH Multimedia A/V Navigation Receiver. Was also installed in my 5th Gen, then removed prior to sale. Comes with steering wheel control interface, GPS antenna, microphone, back-up camera, and all manuals etc. Big 7” WVGA display, and your passengers can watch DVDs while you drive. Will ship on your dime. Will ship on your dime. $750 (currently sells for $1500)

Manufacturer info: AVIC-Z140BH - Flagship In-Dash Navigation AV Receiver with 7" WVGA Touchscreen Display, Built-In Bluetooth®, HD Radio? Tuner, and AppRadio® Mode for iPhone® 4 and iPhone 4s | Pioneer Electronics USA

-The AVIC comes (meaning free) with a Scosche Double Din dash kit. Part # TA2106B. This was for a 2011 SR5, so please check your model year/fitment.

Manufacturer info: Toyota 4-Runner Dash Kit 2010, 2011, 2012, 2013, 2014 | Dash Kits | TA2106B | by Scosche

-Single sliding drawer storage box. Covered in black felt. Has 4 turnbuckles to hold it secure. Made this out of cabinet-grade birch for strength. $120.

-Behind The Grille Light Bracket, made by SOcalTrail. This has a 20” Chinese LED Combo light bar already installed. Yes, the light is actually 21” and 1/2” wide, I didn’t make it! The light works perfectly, didn’t feel like removing it. The work has been done by me. $120. Will ship on your dime.

•Specs on light: 20" High output led light bar (21.5" from end to end), with Center 32 LED's spot 30 degree; Side 8 LED's flood 60 degree, Input Voltage: 9-32V DC. Power Consumption: 120W(3W40pcs High Intensity CREE LEDs). Lumen Flux: 7500+LM. Color Temperature: 6000K. Beam Pattern: Spot. Beam Angle: Combo; 30 degree + 60 degree.

Manufacturer Info: http://www.toyota-4runner.org/5th-g...erested-behind-grill-light-mount-bracket.html

All the above also advertised locally on CL @: Toyota 4Runner Items (5th Generation)

 

[Rubberdown]

I want your rack but I live in tx. Dang it.

 

[SigSense]

I want your rack but I live in tx. Dang it.

Time to take a road trip:thumb3:

 

[Osmith]

Is the ladder still for sale??

 

[Osmith]

Please pm me.....dibs on ladder

 

[SigSense]

Yes, ladder is still for sale, PM'd you OSmith.


Gobi is now SPF to OSmith.

 

[Doc_Fry]

How about the light bar bracket? Have 24" leds need to make a bracket.

 

[SigSense]

Bracket/LED SPF.

 

[DannyLlama]

Would you part with the dash kit alone? if so, how much?

(Scosche Double Din dash kit. Part # TA2106B.)

 

[Ktmbass85]

Where in FL? I would be interested in checking this stuff out if you live close.

 

[SigSense]

How about the light bar bracket? Have 24" leds need to make a bracket.

The bracket I listed was made by a member here on T4R.Org. I believe that a 24" LED could be mounted on it.

Would you part with the dash kit alone? if so, how much?
(Scosche Double Din dash kit. Part # TA2106B.)

For the moment I prefer to list the Scosche dash kit with the Pioneer as it assists in the sale to those that want to do a all-in-one switch. Later I'll contact you if there's no traction on the two items selling together.

Where in FL? I would be interested in checking this stuff out if you live close.

I have left WPB and am now temporarily in Louisville, KY. Job reasons move me around the world, south FL, and KY. Two weeks ago I was in San Francisco. Three weeks ago I was in Phoenix, AZ. Six months ago I was in southern Afghanistan. Life is crazy.

 

[Doc_Fry]

Right, i am tracking about the bracket. What about selling just the bracket. I dnt need lights.

 

[SigSense]

Sorry Doc, I misunderstood. The bracket/LED combo is SPF. Thanks for the interest. Fire off a PM to SocalTrail and see if he's making any more of the brackets. They are strong and can support all kinds of lights/horns/gadgets you need safely mounted.

 

[SigSense]

BajaRack SPF.

 

[SigSense]

AVIC Now $700 Shipped CONUS

Price drop on the AVIC, now $700 shipped to you CONUS.

 

[SigSense]

AVIC Price Drop

Price drop on the AVIC, now $650 shipped to you CONUS. It is plug and play.

 

[Osmith]

Guys, great seller and very easy transaction. Even helped me install the ladder. Great guy!

 

[SigSense]

Thanks OSmith! It was great meeting you and assisting with the install! May it give you years of good use and help hauling your gear on future adventures.

 

[Cincyvol]

BajaRack SPF.

Sig, did this sale go through?

 

[SigSense]

Sig, did this sale go through?

Yes CincyVol, it did. I sent you a PM this morning, but I'm seeing that all my "sent" PMs are missing for some reason.... sorry.