FS Cheap 4th Gen parts

[thorrunner]

I've done some upgrades lately and I have a few parts collecting dust in my garage. I live in NW Phoenix if anyone is close enough to pick up, otherwise I can ship.


2" rear spacer (gives full 2" of rear lift) $25
1.25" wheel spacers (NOT HUB CENTRIC) with lugs $50
FJ rear coils prefer pickup but will ship, best offer
Stock sr5 running boards (pickup only) make offer
FJ front / rear shocks (pickup only) make offer
U Haul tow hitch (pickup only) make offer *will be avail in a couple weeks
265 75 16 Hankook tires (pickup only) about 5k on them best offer *will be available next week

Here is a pic of how the vehicle sits with the rear spacer and FJ Springs:

I will post up better pictures tomorrow or as requested. I can take paypal for shipped items.

About the wheel spacers, they are the $116 ones on ebay that I ran for a few months but decided to switch to Spidertrax. They mounted up fine and did not vibrate at highway speeds. I changed my mind since I tow a lot and I prefer to put all the weight / force on the hub rather than the wheel studs.

 

[thorrunner]

Springs are pending sale
Tires are pending sale

 

[thorrunner]

Rear FJ springs and tires are sold

Anyone for the wheel spacers? $50 is cheap!

I can ship out the stock 4 runner shocks / springs if anyone wants them.

The only stuff I won't ship are the running boards or the tow hitch, any questions just shout!!

 

[newemi]

ugh. I want the spacers, but I do a lot of hauling as well. In fact I just pulled a 5,000lb trailer form MN to Socal last month.

I really don't understand why these small hunks of metal are so expensive.

 

[ARK_SWAMP_RIDER]

I'd be interested in just the rear shocks if you'd separate. PM me if you will.

 

[thorrunner]

ugh. I want the spacers, but I do a lot of hauling as well. In fact I just pulled a 5,000lb trailer form MN to Socal last month.

I really don't understand why these small hunks of metal are so expensive.

5000lbs...??!! I hope you have the v8!! My boat isn't nearly that much and the Runner isn't too happy towing it.

 

[thorrunner]

I'd be interested in just the rear shocks if you'd separate. PM me if you will.

PM sent

 

[newemi]

yeah... no. V6. It's a single axle enclosed 6x12... packed to the brim. I'm guessing on the weightt, but it was heavy. Had a head wind for almost the entire trip so overall mileage dropped to about 11mpg, despite going 55-60mph the entire way. Spent over a grand in gas in one week.

GLWS

 

[Djrashonal]

Do you have the Bilstein FJ shocks, or the Tokico?

 

[thorrunner]

They were the none bilstein shocks and they are gone. I've been offline for almost a week, sorry for the delay. The only parts left are the: running boards, rear lift spacer, lug centric wheel spacers, and the tow hitch.
I will have a front lift spacer and fj fronts available soon, thanks everyone

 

[Djrashonal]

keep me posted on the front lift spacer and the fj fronts!

 

[thorrunner]

Will do, my toytec order has shipped and will be out here tomorrow. I most likely will not install it until around mid July b/c I am leaving for vacation this Friday.

Right now I am running a Readylift 3/2 kit with FJ springs and Bilstein shocks. I am keeping the shocks and the stock top plates but I will be looking to sell the 3/2 kit (with diff drop and skid spacers) and the FJ springs. I ordered the toytec springs but they don't come with top plates.... I will keep you posted for sure. It will be cheap!
Andrew

 

[Djrashonal]

Thats perfect! I'm in tucson and cheap is what I need. Just bought the truck and would love to upgrade, but the wife doesn't seem to have the same vision, therefore, my pockets do not share the same dream. Enjoy the Vaca, and PM me when you get everything swapped out.
Aarash

 

[thorrunner]

Tuscon? Nice... we can meet up and hit some trails.

This might be last minute but, today is the day to register for SedonaFest. Since you are local you might be interested. Check out the website at Welcome! | http://sedonafest.com/ Registration opens tonight at 8pm and will fill up quick.

It is real big with the FJ guys but there will be a few Runners up there!

 

[thirstyturtle]

I thought 4th gen wheel spacers HAD to be hub-centric? Why aren't yours? If they were I'd buy them!

 

[thorrunner]

The lug centric design centers the wheel on the assembly via the lug studs vs the hub centric design that centers the wheel on the hub, using the lug nuts just to hold with wheel against it.

The lug centric is cheaper so someone who doesn't want to drop $200 plus tax and shipping for the spidertrax might want them, also some aftermarket wheels don't use a hub centric design so having the more expensive spidertrax isn't worth it.

I bought them b/c they were like $116 shipped (off ebay) and the worked fine. Mounted up nicely and no wobble on the highway but eventually i upgraded to the hub centric design since I do some pretty aggressive wheeling and I tow my boat quite a bit. I wanted all the pressure / forces of wheeling on the hub, not the studs.