Group BUY on Outdoorlogic 3rd Gen Front Bumper

[Pikeman]

The shop that built my front bumper is wanting to get them out to the market and I want to help. I am posting a group buy for him.

For 5-9 he will take 10% off. If there are 10 or more 15% off. Once 5 orders are placed he will start build and charge. If you are in the first 5 and he ends up with 10 or more you will be credited the additional 5% to get the full 15%. Lead time after you are charged is 3-6 weeks. If you order with powder coating additional time me be required. Standard powder coat color is the silver/black hammertone finish, other options upon request. If you are outside the lower 48 please contact directly for shipping quote. If you want to order please respond in thread and send me a PM. Currently payment will be through Paypal directly to the shop.

Group Buy is from 7 December until 15 January 2011.

 

[downpour11]

IM IN! Full hoops just like yours Pikeman! No powdercoat, and possibly no shipping if I can pick it up Jan 1st or 2nd... I know... i would need to pick it up on a sat. on new years day hahah. I will be in Vista, CA for new years, its just an hour south of Riverside. I can drive up. But shipping is no big deal if that is situation is not do-able. Thanks... incoming PM....

 

[thorridder]

think you could photo shop what they all look like? thats a way better price by like $300 than what i was looking at. very interested.

 

[SoCal]

I would love to get in on this but unless I get some serious Christmas gift money I don't see it happening. I hope more people take advantage of this group buy.

 

[Hepar]

Man, I think that is one of the best plate bumpers out there. Too bad I prefer the tube bumpers over the plate. Just think it fits the style better.

10-15% off would end up being a killer price too! Good luck.

 

[Pikeman]

Here are two of it without the hoops bare steel during fitment but I will try to Photoshop without and also Pre-Runner style.

 

[jsmithjr732]

I've seen this bumper in person--looks great!

 

[Clemsonfan15]

I'm not interested in one, but had a question.

For people who had Limited flares, would he make the bumper flush with them?

 

[Pikeman]

Already covered in the build thread, but the edges on this bumper kick out wider then the SR5 silver flares that I have by about an inch. Have had a few other members look at it and think it would be flush or close enough to flush with the Limited flares that it would look good.

 

[3rdGENoobie]

I'm not interested in one, but had a question.

For people who had Limited flares, would he make the bumper flush with them?

thats a good question, and are there going to be room to mount 2 7inch lights in the middle hoop? on the bumper?

 

[Crywolf]

God I wish I had an extra grand layin around for one of these!

 

[Pikeman]

thats a good question, and are there going to be room to mount 2 7inch lights in the middle hoop? on the bumper?

Yes there is room to mount two 7" lights in the center hoop on the bumper. I should have mine put on this week and will put that picture up.

 

[Pikeman]

OK so here is the list so far:

1. Downpour11-bare steel full hoops
2. Masson74 (as per PM last week)

 

[3rdGENoobie]

Yes there is room to mount two 7" lights in the center hoop on the bumper. I should have mine put on this week and will put that picture up.

cool can't wait to see the pics, I'm defiantly interested in the bumper, but I just ordered my Toytec ultimate and 1inch bodylift
anyway u can extend the offer thru feb? only 2 people so far...

 

[Pikeman]

Well it has only been posted for 24 hours so far. Will see how it goes a little further into it and I am sure we can discuss it later especially if it means your order would be the difference between a level.

 

[thorridder]

it says the color is silver/black. does that mean silver or black? or like dark silver?

 

[downpour11]

it says the color is silver/black. does that mean silver or black? or like dark silver?

silver/black hammertone finish
Look at the pics in the first post, thats the color.

Pikeman, correct me if I'm wrong...^^^

 

[4wd-n-archery]

Wow, I want one of these, but I need to buy a 4 runner first. I am working on getting my finances in order. Hopefully I am ready by the deadline, and hopefully we get enough buyers for the greatest discount. I am just about there.

 

[Pikeman]

Downpour is correct, it is the same color as the pictures. So I guess that would from a distance be a medium gray. If you want powder coated you can get in black but I recommend this finish. The PC says it is thicker and more durable than the single color finishes.

 

[masson74]

Newb question. Are the holes in top cut for a specific winch. I was thinking of getting the smittybilt xrc8 8K winch.

Dave