BlackCat914
New member
May be a while before I get back to you on the mileage, my rear suspension compressor went out today. I ordered the metal tech coil conversion and some FJ springs.
GX picture album
- Thread starter the great him
- Start date
May be a while before I get back to you on the mileage, my rear suspension compressor went out today. I ordered the metal tech coil conversion and some FJ springs.
the great him
Elite Member
How funny I just did this swap this weekend. Not because I had an issue, but rather because I didn't want to have an issue at an inopportune time. I put some icon shocks in the back, and they are nice, but a little soft. I'm getting some air bags for inside the coils to help stiffen up the rear. One thing I noticed is the rear squats a lot more under acceleration and a little more body roll in corners. I think it has to the with the taller and heavier body on the GX.
BlackCat914
New member
Interesting. How is the height? I read a thread where they gave a 4th gen 4Runner about an inch of lift, so I'm hoping it keeps the truck somewhat level. Maybe I'll get airbags before I install them. I'm leaving my factory shocks there for now, I'll let you know my opinion when I get it all thrown in. How long did it take you?
the great him
Elite Member
I already had a little lift... I had dropped the air bag height sensors tricking them into thinking the truck sat lower than it really did, thus telling the computer to add more air and that lifted the rear about 1.5-2". I just have a spacer lift for now. I'm waiting on the OME BP-51 set up to be released for the 120 chassis and then I'm going with that. All said it was about 6 or so hours... But that with me having a bad back(lots of pain meds and muscle relaxers) moving very slowly, plus dealing with some rust issues -my GX spent its first years of life in New Jersey. Anyhow yeah if I was just doing bags to springs I probably could do it in a couple of hours. A big pain in the ass for me was the icon shocks, their rubber grommets or bushings at the top are super thick an it was a royal pita to install.
One trick I'd suggest is to unbolt all the brake line hangers from the rear axle and undo all the clips for the abs sensors, as well as the sway bar so you can get the rear axle to drop down further and it will be easier to get the new springs in. I was able to get the air bags out fine without doing that's, but no way was I getting my springs with spacers in -on second thought if not lifting then you might be able to.
One trick I'd suggest is to unbolt all the brake line hangers from the rear axle and undo all the clips for the abs sensors, as well as the sway bar so you can get the rear axle to drop down further and it will be easier to get the new springs in. I was able to get the air bags out fine without doing that's, but no way was I getting my springs with spacers in -on second thought if not lifting then you might be able to.
BlackCat914
New member
Cool, thanks! I'm sure I'll have some issues with rusty parts as well.
the great him
Elite Member
That hard part will be the shocks. Start soaking bolts with oil or lube. I had been soaking all the bolts for almost two months on a weekly basis, and I got all but two of them, thankfully one was on the old shocks and the other was one of the brake line clips. The shock I just cut with a sawzal, and the other bolt I used a pair of vice grips to get it out(and replaced it with a bolt from the thousands of sapre OE Toyota fasteners I have). I found it was easiest to undo the air lines at the controller back by the compressor and keep them attached to the bag, removing all in one piece. If you have questions feel free to ask or pm me
Last edited:
the great him
Elite Member
Took the GX across the Columbia River the other day via a ferry. Never been on a vehicle ferry before, kinda cool
I took the GX out for some pre workout flex, after giving it some fjc and icon protein...
And one from an outing with the family and some friends. One of our friends caught this pic of me three wheeling it crossing a washed out section of the road... We later found out the road was closed when saw a USFS ranger who looked bewildered that three rigs came up on him in the middle of no where... He didn't care that we were on the road as we where not tearing anything up, and staying on the road. He was a really cool and down to earth guy. We ended up seeing him a few more times that day as we explored.
I took the GX out for some pre workout flex, after giving it some fjc and icon protein...
And one from an outing with the family and some friends. One of our friends caught this pic of me three wheeling it crossing a washed out section of the road... We later found out the road was closed when saw a USFS ranger who looked bewildered that three rigs came up on him in the middle of no where... He didn't care that we were on the road as we where not tearing anything up, and staying on the road. He was a really cool and down to earth guy. We ended up seeing him a few more times that day as we explored.
Attachments
BlackCat914
New member
Hey I have one of those too!
Last edited:
BlackCat914
New member
Mine went a bit easier than yours I think, but I didn't really follow the directions. I removed my swaybar links, and then pulled the LOWER shock bolts out instead of the uppers. I also disconnected the brake line bracket that's near the center of the 3rd member on the back side. That's it. Used two spin jacks and lowered the axle down and popped the springs right in. Went really well. I posted some pics @ club Lexus. Gave me more lift with the FJ springs than I thought it would, but I like it.
TFJ-4runner
New member
the great him
Elite Member
Scat Adams
New member
HiLex,
Very nice! I've been considering those wheels, do you have any pictures directly down the side of the truck? Im curious as to how far they stick out past the fenders with the 285/70's...
Cheers!
Very nice! I've been considering those wheels, do you have any pictures directly down the side of the truck? Im curious as to how far they stick out past the fenders with the 285/70's...
Cheers!
Scat Adams
New member
And because picture thread;
Scat Adams
New member
Damn GX4SEVEND I think thats the first GX I've seen on 35's! Do you have a build thread? Also you should venture over to Ih8mud's 120 section if you havent already
SouthernSS
New member
Scat Adams
New member
Ah I knew I'd maybe seen it before, yours is definitely one of the best setup GX's out there, now just post more pictures for us to drool over!
