Help - coolant in the valley - why?

[Outsider1]

Does anyone know what gasket to use for the bypass coolant line in the Valley. Can’t find any gaskets.

 

[HiLife]

Welcome to the forum. You need to read the whole thread.
Your answer is on post #4.

 

[Outsider1]

Welcome to the forum. You need to read the whole thread.
Your answer is on post #4.

Hello, I just finished replacing the lower intake gasket with Oem ones and I changed the bypass pipe gasket as well but I noticed, after filling the reservoir that after I drive that it still goes down. For the gasket I used the Toyota gasket maker that’s for the transmission pan an let I cure for 24hrs before starting the car

 

[19963.4lsr5]

Hello, I just finished replacing the lower intake gasket with Oem ones and I changed the bypass pipe gasket as well but I noticed, after filling the reservoir that after I drive that it still goes down. For the gasket I used the Toyota gasket maker that’s for the transmission pan an let I cure for 24hrs before starting the car

If you do not have any leaks and do not smell antifreeze just keep topping off the tank as trapped air gets purged from the system. It takes Around three heat cycles with a properly operating Rad cap…..


Sent from my iPhone using Tapatalk