High mount brake light

P

Pavement Tested

Member
Has anyone found a good quality aftermarket high mount brake light? I've been looking for a smoke or tinted one purely for aesthetics. All the ones I'm seeing on Amazon or eBay seem to be hit or miss with a lot of fitment issues. I haven't found any elsewhere.
 
Register to hide this ad
I would just throw some smoked film on it and call it a day. or if you don't want to, go to a local vinyl wrap shop. they can put some smoked film on for cheap. then you have no fitment or water intrusion fears, and if you end up not liking it, you peel it off.
 
I tried a red one I found on Ebay. But eventually reverted back to stock because of water/condensation getting into it. I don't think it's as sealed as OEM.
 
chrisridebike8 said:
I would just throw some smoked film on it and call it a day. or if you don't want to, go to a local vinyl wrap shop. they can put some smoked film on for cheap. then you have no fitment or water intrusion fears, and if you end up not liking it, you peel it off.
Click to expand...

This is option #2. I have a whole roll of tinted vinyl wrap and have been tossing between it and replacing the whole fixture.


emmantik said:
I tried a red one I found on Ebay. But eventually reverted back to stock because of water/condensation getting into it. I don't think it's as sealed as OEM.
Click to expand...

That's just one of my concerns as well. I'm up on the wet side of WA and condensation is all too common.
 
Last edited:
Honestly it's a fairly small piece compared to say the headlights or tail light. Just wrap it and see how you like it, it's a bit of a pain to replace those 3rd brake lights anyways.
 
BlackWorksInc said:
Honestly it's a fairly small piece compared to say the headlights or tail light. Just wrap it and see how you like it, it's a bit of a pain to replace those 3rd brake lights anyways.
Click to expand...

A pain how? 2 screws out in the open, easy to get to, perfect height. Do they leak after being reinstalled? I saw there's a foam gasket on them. Does it even matter if it leak since it's on the spoiler or whatever it's called?

I imagine they're easier to replace than the license plate lights. Can't have the gate all the way up, and at 6'2", stooping is a pain. Those were a hassle to change out.
 
Pavement Tested said:
A pain how? 2 screws out in the open, easy to get to, perfect height. Do they leak after being reinstalled? I saw there's a foam gasket on them. Does it even matter if it leak since it's on the spoiler or whatever it's called?

I imagine they're easier to replace than the license plate lights. Can't have the gate all the way up, and at 6'2", stooping is a pain. Those were a hassle to change out.
Click to expand...

Apparently they finally wised up, I recall doing a couple spoiler mounted LED stop lamps on a few different models, they ran the wiring through the spoiler, was a pain. But you're right it's just two screws and you should be able to replace it easy
 
A light coat of black spray paint or even plastidip on the inside of the cover will do the trick...
I did this on my Jeep years ago then reversed it when I realized "why am I making my brake lights less useful?"
 
BlackWorksInc said:
...they ran the wiring through the spoiler, was a pain...
Click to expand...

That does sound like a pain. Why they wouldn't put a plug at the light and have a small harness extension is beyond me. Don't know if the 4R comes without the spoiler these days but at least the light doesn't have a pigtail like you describe. I believe this light assembly is used on a few different models.


jawkdna said:
A light coat of black spray paint or even plastidip on the inside of the cover will do the trick...
I did this on my Jeep years ago then reversed it when I realized "why am I making my brake lights less useful?"
Click to expand...

There's tint spray paint available for this type of application. One such product is called Nite-shades made by VHT. A very nice finished product can be had but there is a lot of work involved and I'm just not that interested in doing it. I don't have an issue tinting the high mount light when the other 2 brake lights are more noticeable anyway.

Why on earth would you use black paint or plastidip? My mind is totally blown.

I applied some tint film today. Didn't want to waste $40+ on a cheap C.P.O.S. off of Amazon or eBay since none of them review particularly well.
 
Last edited:
codyHTX said:
I've had this one for years, nothing special about it, but it's worked fine.

Amazon.com: iJDMTOY Smoked Dark Lens 9-LED 3rd Brake Light Assy Compatible With Toyota 4Runner Highlander Prius Sienna etc, Rear Center Roof High Mount LED Third Brake w/Strobe Braking Feature : Automotive
Click to expand...

That's the one I was looking at getting but there just isn't enough decent feedback for me to get one.

I'm actually pretty surprised that there aren't more quality options for exterior OEM lighting component upgrades other than fog lights given the longevity and popularity of the 5th gen.
 
I was curious about these last year but never pulled the trigger. There are a few options out there including iJDMToy, DNA, and PM (my saved amazon links below). Reviews are hit or miss but also not enough to confirm quality. I like the LED bar feature of the iJDMtoy but not sure what I would wire it to. DNA seems to have all of the color options available (including smoked lens, clear lens, red lens, etc). It's a subtle change but I'm sure would compliment a nice set of tail lights. The white bar definitely stands out on darker colored 4Runners.

Amazon.com: Compatible with 4Runner 10-16 LED Third 3RD Tail Brake Light Rear Stop Lamp Smoked Housing : Automotive

Amazon.com: DNA Motoring 3BL-4RUNNER10-LED-BK LED Third Tail Brake Light [For 10-16 4Runner] : Everything Else

Amazon.com: DNA Motoring 3BL-4RUNNER10-LED-SM LED Third Tail Brake Light [For 10-16 4Runner] : Automotive
 
if you can, wait a little longer. I know of one coming to market more geared towards offroad guys to be used as a chase light. Think single row LED bar integrated into the spoiler. stop/turn/on/off functions.
 
honda250xtitan said:
if you can, wait a little longer. I know of one coming to market more geared towards offroad guys to be used as a chase light. Think single row LED bar integrated into the spoiler. stop/turn/on/off functions.
Click to expand...

hopefully i see this before i sell my truck, always wanted something like that.
 
honda250xtitan said:
if you can, wait a little longer. I know of one coming to market more geared towards offroad guys to be used as a chase light. Think single row LED bar integrated into the spoiler. stop/turn/on/off functions.
Click to expand...

Any info on this? Company, ETA, pictures, price, etc?
 
You must log in or register to reply here.

Members online

Total: 290 (members: 2, guests: 288)

Forum statistics

Threads
278,307
Messages
3,554,056
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top