B'klyn_Mike
New member
If you'd like to see a STICKY made for ALL T4R TSB's then cast a vote!
Mike :artist:
Mike :artist:
How about a STICKY for TSB's?
- Thread starter B'klyn_Mike
- Start date
Register to hide this ad
harper7
Senior Member
This should probably be in the "general discussion" part of the forum if you want it for all runners.There are only 3 known TSB's for 5th Gens.I'm always on the look out for them.
(T-SB-0155-10) MIL "ON" DTC P0456 ......
Some 2010 model year 4Runner vehicles may exhibit a MIL “ON” condition with Diagnostic Trouble Code (DTC) P0456 stored in the Engine Control Module or ECM (SAE Term: Powertrain Control Module/PCM).
(T-SB-0166-10) ECM Calibration: Enhancement to Shifting Performance
Some 2010 4Runner, FJ Cruiser may exhibit a harsh shift on acceleration below 20 mph during the 2-1 downshift on vehicles equipped with an A750 transmission. The Engine Control Module/ ECM (SAE term: Powertrain Control Module/PCM) calibration has been revised.
(T-SB-0175-10)Front Differential Growl/Rumble Noise ......
Some 2010 model year part-time 4WD 4Runner vehicles may exhibit a growl or rumble noise from the front differential assembly when the vehicle is in motion in 2WD.
The first one I has to do with throwing a faulty CEL for the evaporative emission sytem and the other 2 were very early production 5ths only.
Anybody else have any more?or access to find out?
(T-SB-0155-10) MIL "ON" DTC P0456 ......
Some 2010 model year 4Runner vehicles may exhibit a MIL “ON” condition with Diagnostic Trouble Code (DTC) P0456 stored in the Engine Control Module or ECM (SAE Term: Powertrain Control Module/PCM).
(T-SB-0166-10) ECM Calibration: Enhancement to Shifting Performance
Some 2010 4Runner, FJ Cruiser may exhibit a harsh shift on acceleration below 20 mph during the 2-1 downshift on vehicles equipped with an A750 transmission. The Engine Control Module/ ECM (SAE term: Powertrain Control Module/PCM) calibration has been revised.
(T-SB-0175-10)Front Differential Growl/Rumble Noise ......
Some 2010 model year part-time 4WD 4Runner vehicles may exhibit a growl or rumble noise from the front differential assembly when the vehicle is in motion in 2WD.
The first one I has to do with throwing a faulty CEL for the evaporative emission sytem and the other 2 were very early production 5ths only.
Anybody else have any more?or access to find out?
Last edited:
B'klyn_Mike
New member
You are absolutely right Gary! I thought about that after posting the poll....can you say 'big ooooops'? Maybe the Admins. will read this post and move it to the GENERAL area so all can see and participate?
Mike :artist2:
Mike :artist2:
B'klyn_Mike
New member
None from me! :thumb3:
Mike :artist2:
Mike :artist2:
admin
Administrator
This is done (almost). Here's what I've done:
1. Split all TSBs into individual threads.
2. Moved all threads into TSB forum.
3. Opened all TSB threads.
4. Made the TSB table of contents post sticky.
In the next few days, I'll make each entry in the TSB table of contents post a link to the corresponding TSB thread.
1. Split all TSBs into individual threads.
2. Moved all threads into TSB forum.
3. Opened all TSB threads.
4. Made the TSB table of contents post sticky.
In the next few days, I'll make each entry in the TSB table of contents post a link to the corresponding TSB thread.
