How do you get power on your roof??

[3rd gen king]

I was thinking about slapping some lights on my roof and im a little stumped as to how to cleanly get power to them, so what do you do?

I was thinking drivers front pillar up to sunroof but I'm still on the fence about that.

 

[blcktpgsr]

Cleanest possible way is to have the wires come out of the roof rail end caps. If you pop out those caps, you`ll see plastic cover plugs underneath that you can remove, drill holes and run the wires through and out the roof..

Put the plug or plugs back and use some silicone to seal from any water penetration.

Mines holding up well after installing the lights this way.

Check this link and scroll down post 14 for a picture.
http://www.yotatech.com/f131/wiring-help-roof-mounted-lights-228508/?highlight=roof+rack+lights

 

[3rd gen king]

Cleanest possible way is to have the wires come out of the roof rail end caps. If you pop out those caps, you`ll see plastic cover plugs underneath that you can remove, drill holes and run the wires through and out the roof..

Put the plug or plugs back and use some silicone to seal from any water penetration.

Mines holding up well after installing the lights this way.

Check this link and scroll down post 14 for a picture.
Wiring Help For Roof Mounted Lights - YotaTech Forums

Thanks my good sir, and sweet rig!