i need an eletrical mastermine

shootmymime

New member
even more lights and eletrical questions, see if u like?

ok... bare with me as i try to explane my self!


this is a picture of the front of my truck!
Photo_092707_002.jpg
~original[/IMG]

i know people want to put clear corners on their 4runner to make it looks better.... but since i have the brush guard and 2 orange fogs... why not keep them?


can i just throw another bulb inside of that crome bumper orange pice? and hook it up to the fog light switch?

BUT i want the blinker to still be bright and noticeabul when i signal..... and that will happen with the stock light that is allready there? is have some questions about that


i have a 4 day weekend from school (senior skipday thuresday) so let me know by then and might have it done by sunday! with pictures!
 
Last edited:
Register to hide this ad
I think you have bigger issues than lighting things, your licence plate has grown pubic hair!!!:D

With a 2nd bulb in the turn signals, it will make them look like they are constantly on which I think would look crap. Also, for the signal to be brighter, as it needs to be, the extra light will be pretty weak and again look crap, imho. I'm not 100% sure on this but I suspect you may have a legal issue with front turn signals illuminated at say half brightness, I believe they must be a stand alone light source and not like rear turn signals which can combine brake light/tail light/turn signal into one. But I could be wrong on that.
If you do decide this is really what you want, do the wiring with its own fused relayed circuit.
 
ahh no way! forgot to shave them!


yeah u did bring up some issues... all check some laws and see what would be legal and what not
 
easy and can be done with one light bulb. you just need to find a light socket with 3 wires. 1 wire to ground 1 to the signal and the other to a on switch. just make sure you dont wire two + wires together. it will blow your fuse or even worst.

it will turn off the "day light" while its being used as a turnsignal.

i have done this to my 300zx side marker. its on when my headlight is on but will flash when i signal.
 

Members online

Forum statistics

Threads
278,306
Messages
3,554,046
Members
248,016
Latest member
Advally Service

Trending content

Back
Top