in channel vent visors

[Rolltide10]

anyone had any trouble with inchannel vent visors peeling their tint?

 

[Conspearasea]

I just bought weathertech in channels for my 4runner, but am not home to install them yet.........but, I was assuming that the way they install that all contact will be with the outside of the window, and not contacting the inside w/ the aftermarket tint.....

Hmmm....got me wondering now if my tint will be getting trimmed up after a while.

I see your sig. has vent visors, are you having this problem with yours?

 

[Clemsonfan15]

They haven't affected mine.

 

[Rolltide10]

that picture doesn't have vent visors i just got them today and since they go up in the seal it presses the tinted side tight up against that rubber when you roll it up so i was just curious if after a while it would start wearing down

 

[Cruzrtwdgt]

the last vehicle I had with aftermarket tint had about a 1/4 inch around the edge of the window with no tint on it where it would meet the rubber; maybe your installer can trim it this way (or you) if you have not had the tint installed yet.

 

[Rolltide10]

my tint is already on... and they used a computer cutter so the tint goes maybe 2 millimeters from the edge

 

[Clemsonfan15]

the last vehicle I had with aftermarket tint had about a 1/4 inch around the edge of the window with no tint on it where it would meet the rubber; maybe your installer can trim it this way (or you) if you have not had the tint installed yet.

That's how mine is. I'm glad he did it like that now.

 

[Rolltide10]

how long have you had you in channels?