Installing Transfercase on a 2wd Transmission

[4running1990]

I have a 1995 4runner Auto 3.0L 2x4 4runner that i am currently converting to 4x4. I just need to know if a stock transfer case will fit and does the transfer adapter match up to the 2wd transmission? This is the last thing i need for the project.

 

[Jamesd]

No it will not bolt up BUT Inchworm gear make an adapter so you can take a 2WD trans and make it 4WD.

James

 

[4running1990]

So this adapter will fit a 95 and will i just need the transfer case?

 

[fourwd1]

All the details are on Inchworm's site.
You'll also need their PreRunner adapter because yours is 2WD.

 

[4running1990]

Ok cool, thanks. Gotta start saving up now.

 

[fourwd1]

Ok cool, thanks. Gotta start saving up now.<!-- google_ad_section_end -->

I bet, your talking $1250.00 plus the cost of a t-case. Plus a crossmember and mount, driveshafts, etc, that's an expensive project you have going.

 

[4running1990]

Yeah i got the knuckles with hubs (manual locking) and the diff. with the cv axles all for only $300. And im just going to swap the whole transmission and transfer case because i found one on craigslist for $250. The drive shafts were $80 a piece on ebay. And i installed everything myself, all thats left is the tranny. So im just happy i spent a lot less than i thought. :biggrin2:

 

[fourwd1]

Yeah, replacing the 2WD trans with a 4WD one is a much better way to go.

 

[4running1990]

Yeah man thanks for the info. Nice ride by the way