Konig Countersteer X w/stock tires/no lift...pix?
- Thread starter SShink
- Start date
singletrackftw
New member
Yeah they are the matte bronze Countersteer X's. I'm so happy with them & with Dustin at FN wheels, he was awesome, the wheels are lightweight and of awesome quality & he threw in spline locking lugs for free, as well as stickers and a t-shirt.
Thanks, I spend a lot of time and money on bicycles, so they're pretty dialed in. My superfly is my pride and joy, nearly 1500 miles on that Carbon hardtail & no issues whatsoever.
If you order the wheels, tell Dustin that Tyler Rice sent ya! Nothing in it for me I just like helping out good businesses.
Hi singletrackftw,
Love the look of your runner. Just bought my wife our first ever 4Runner last week. Taking my time looking around the forum at all theses great runners trying to get some inspiration on mods.
I'm taking it by your pictures that you have no lift done on yours? My wife doesn't want any lift on her's but I do want to put some new wheels and tires on. I'm not sure on the wheels just yet but I'm sure on the KO2s. Love the way your runner sits!!
singletrackftw
New member
Thanks a lot! You are correct! Bone stock except for the wheels and tires. Don't let anyone tell you that the KO2's are bad or sub par. They're great tires! Same deal here, we bought this runner for my wife but I'm enjoying modding it a little bit here and there. Here are a couple more pics.
Thanks a lot! You are correct! Bone stock except for the wheels and tires. Don't let anyone tell you that the KO2's are bad or sub par. They're great tires! Same deal here, we bought this runner for my wife but I'm enjoying modding it a little bit here and there. Here are a couple more pics.
Great pics.
Thanks for the advice on the KO2s. A buddy I work with has them on his jeep and he loves them. I first saw them on a quick trip into Costco, thought they looked great but now I've seen them on your runner I'm sold on them for sure!!
Thanks again.
singletrackftw
New member
Just lifted the truck, figured I'd post a pic!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
brockvond
New member
I've done some research and noticed that Town Faire Tires carries Konig wheels. Has anyone ordered from and had counter steers or six shooters installed at Town Faire? I think I'm leaning to the six shooters as the specs more closely resemble oem wheel specs, and I don't want rubbing. I m planning to run stock size p rated nitto terra grapplers with the six shooters. I know that some port trimming is needed with Trd pro wheels and nittos for the Trd pro model to avoid rubbing, and the Trd pro wheel is a 17x7, 4-6mm off set, approx 4.2" backspace.
2016 sr5p super white 4wd
2016 sr5p super white 4wd
brockvond
New member
[MENTION=134037]singletrackftw[/MENTION]. Great setup. I think we might be twinsies in the future. I noticed in your pics that your illuminated fog lights look yellowish. Are you running something other than the stock h16 bulb in them, eg the piaas, etc?
2016 sr5p super white 4wd
2016 sr5p super white 4wd
singletrackftw
New member
Bilstein 5100's all the way around with the fronts set to 1.75 (the second highest setting)
singletrackftw
New member
Yeah, they are just NOKYA hyper yellow bulbs. I also have NOKYA yellow bulbs in my DRL's and they look and perform incredibly. I have the same NOKYA yellow bulbs in my civic si fog lights and DRL's. Such a cheap little mod but it looks great at night at they truly are brighter than stock halogens. Some people run yellow overlays - which I do like, but over time those get really dingy and sometimes they look burnt. You'll be really happy with replacing the stock fog bulbs and DRL's with NOKYA hyper yellows.
Last edited:
brockvond
New member
Thanks. Regardless of aesthetics, my hesitation with fog light covers is that they would reduce light output.
singletrackftw
New member
Here are some more pics after the Bilstein install. Give you an idea what 1.75 front and stock rear looks like (bilsteins all around)
2016 SR5P 4wd - FN wheels countersteer X - 265/70 BFG KO2 - Bilstein 5100 (1.75 setting) - NFab side steps - TRS Morimoto 4300k HID kit - NOKYA yellow fogs & DRLs
2016 SR5P 4wd - FN wheels countersteer X - 265/70 BFG KO2 - Bilstein 5100 (1.75 setting) - NFab side steps - TRS Morimoto 4300k HID kit - NOKYA yellow fogs & DRLs
When you were at stock height, did you rub with that setup (konigs and bfg tires)?Here are some more pics after the Bilstein install. Give you an idea what 1.75 front and stock rear looks like (bilsteins all around)
2016 SR5P 4wd - FN wheels countersteer X - 265/70 BFG KO2 - Bilstein 5100 (1.75 setting) - NFab side steps - TRS Morimoto 4300k HID kit - NOKYA yellow fogs & DRLs
singletrackftw
New member
Alright guys. Those wheels and tires WITHOUT a lift only gave me slight rubbing at full lock in reverse... This could be easily fixed by simply messing with the fender liner or specifically removing the front mud flaps. I decided to just deal with it & I knew it wasn't really hurting anything & after doing my bilsteins there was no longer any rubbing!
Instagram @tcr_89 2016 SR5P 4wd 3rd row - FN wheels countersteer X - 265 KO2 - Bilstein 5100 (1.75 setting) - NFab side steps - TRS Morimoto 4300k HID - NOKYA yellow fogs & DRLs - AVS hood visor
