J JP4RNR New member Apr 2, 2021 #1 Is it ok to lift and support with jack stands a 4th gen by the lower control arms?
rdruss Senior Member Apr 3, 2021 #2 Yes, I've done it. Use some wood blocks between LCA and jack stand so don't put gouge on LCA. Be careful, as always. Normally I jack on the frame just behind wheel well and put jack stand w/wood block as close to jack pad as possible.
Yes, I've done it. Use some wood blocks between LCA and jack stand so don't put gouge on LCA. Be careful, as always. Normally I jack on the frame just behind wheel well and put jack stand w/wood block as close to jack pad as possible.
