I bought a set of these as the first stage of an eventual projector retrofit. Seemed like a reasonable price to performance ratio. I paid the extra for the high-low version.
There are lots of complaints on the internet about them being slow to ship and in this hyper-fast society, a full business week (which is what it took them for my order) is really unreasonable but since I expected it, I didn’t mind as much as some.
The company sends out a ton of emails on the order but my ISP spam filter grabbed them all. I think it is because if you look at the return address, it is not a properly formatted address.
I haven't installed them yet but have a couple of comments.
One irritant with the kit is that it doesn't come with mounting brackets. I contacted DMM tuning support and was told that the kit had double sided tape and cable ties for mounting. I finally found them packed in with the bulbs. Seems like a poor way to mount anything in the engine compartment and definitely won't look stock. I ended up ordering a couple of
brackets from
this guy on eBay. They look like the same ones you can buy from other dedicated HID websites for less. $2 each. DMM should at least have them as an option when you order the kit.
The other thing is it looks like the harness is going to be tight. I had originally assumed I would be able to mount the passenger side ballast someplace on the fender but the harness is too short. Also with the high-low function the ballast has to be close to the headlight to make the connection. I'm pretty certain that I'm going to end up cutting up the harness to lengthen the cables.
I plan to do a write up once I get all the parts.