Maintenance Day BBQ

01thunder said:
Wow. I thought we would have had more than 8 guys total. Anyway, i have some parts left in the garage. Guys tell me what you want/need and i'll look to see if i have it. I have a lot of trim pieces in all colors, weather seals, one leather tan armrest, etc. Cheap prices to get them out!
Click to expand...
Yeah, some people wanted to make it but couldn't and I am sure some forgot.

Do you happen to have a cylinder compression checker? If so could you bring it? I have been curious of my compression. Thanks!
 
01thunder said:
ok. so it's thursday and a list needs to be made of who needs work done and what, tools needed so the work gets done and who is for sure attending. do we need to bring a dish?

i am in brandon/tampa area, so who else is around here so we can meet somewhere at a certain time and roll out together?
Click to expand...

01Thunder, I'm in South Tampa so we could certainly meet up and roll out together.

Update on parts:

The cooler should arrive today, if so, I'm planning on going to the base (MacDill) tomorrow and using the lift and installing. I'm sure it'd be much easier putting the truck on the lift. If it arrives tomorrow, I'll bring it with the hoses and clamps, with ATF and maybe we can install. Is there anything else I'll need?

The radio is in, but the wiring harness won't be in until the 26th so I'll have to wait on that, but maybe someone could show me how to take apart the dash if they've done it before.

The seat desperately needs to be fixed so I'll bring some bolts, nuts, washers and my cordless drill with some bits and maybe we can figure something out with that.

I'll also bring some cold beer, I can bring my floor jack and jack stands in needed, just let me know.

Warrior
 
awthorn said:
Yeah, some people wanted to make it but couldn't and I am sure some forgot.

Do you happen to have a cylinder compression checker? If so could you bring it? I have been curious of my compression. Thanks!
Click to expand...

memorial day weekend as well. i do not, but one could be had from harbor freight for about $20.
 
warriorwagner said:
01Thunder, I'm in South Tampa so we could certainly meet up and roll out together.

Update on parts:

The cooler should arrive today, if so, I'm planning on going to the base (MacDill) tomorrow and using the lift and installing. I'm sure it'd be much easier putting the truck on the lift. If it arrives tomorrow, I'll bring it with the hoses and clamps, with ATF and maybe we can install. Is there anything else I'll need?

The radio is in, but the wiring harness won't be in until the 26th so I'll have to wait on that, but maybe someone could show me how to take apart the dash if they've done it before.

The seat desperately needs to be fixed so I'll bring some bolts, nuts, washers and my cordless drill with some bits and maybe we can figure something out with that.

I'll also bring some cold beer, I can bring my floor jack and jack stands in needed, just let me know.

Warrior
Click to expand...

you military? i went to the hobby shop last week but was early. they open at 11! my check engine is on and don't like it so i need to erase the code. don't know if they have a scanner though.
 
01thunder said:
you military? i went to the hobby shop last week but was early. they open at 11! my check engine is on and don't like it so i need to erase the code. don't know if they have a scanner though.
Click to expand...

Yes, Navy....stationed at SOCOM. They're only open Thur/Fri and Saturday and I'm off tomorrow so I wanted to get my cooler installed but it hasn't arrived yet. Either way, I'm going tomorrow to get my tires balanced, I have a little shake at 65mph, not to bad, but want to try see if that takes care of it. I have an alignment done last week.

Not sure on the scanner, I'll ask when I'm there tomorrow.
 
warriorwagner said:
Yes, Navy....stationed at SOCOM. They're only open Thur/Fri and Saturday and I'm off tomorrow so I wanted to get my cooler installed but it hasn't arrived yet. Either way, I'm going tomorrow to get my tires balanced, I have a little shake at 65mph, not to bad, but want to try see if that takes care of it. I have an alignment done last week.

Not sure on the scanner, I'll ask when I'm there tomorrow.
Click to expand...

what color tonneau cover do you need?
 
warriorwagner said:
Yes, Navy....stationed at SOCOM. They're only open Thur/Fri and Saturday and I'm off tomorrow so I wanted to get my cooler installed but it hasn't arrived yet. Either way, I'm going tomorrow to get my tires balanced, I have a little shake at 65mph, not to bad, but want to try see if that takes care of it. I have an alignment done last week.

Not sure on the scanner, I'll ask when I'm there tomorrow.
Click to expand...
I know SOCOM is a big place but do you know Rob Rosa?
 
[MENTION=102266]SRQ-Runner[/MENTION] I found the kit...my dad is just too short/blind. It looks like #7 might do the trick.

uploadfromtaptalk1432250907617.jpg
uploadfromtaptalk1432250925010.jpg
 

Attachments

  • uploadfromtaptalk1432250907617.jpg
    uploadfromtaptalk1432250907617.jpg
    138 KB · Views: 84
  • uploadfromtaptalk1432250925010.jpg
    uploadfromtaptalk1432250925010.jpg
    132.2 KB · Views: 82
warriorwagner said:
01Thunder, I'm in South Tampa so we could certainly meet up and roll out together.

Update on parts:

The cooler should arrive today, if so, I'm planning on going to the base (MacDill) tomorrow and using the lift and installing. I'm sure it'd be much easier putting the truck on the lift. If it arrives tomorrow, I'll bring it with the hoses and clamps, with ATF and maybe we can install. Is there anything else I'll need?

The radio is in, but the wiring harness won't be in until the 26th so I'll have to wait on that, but maybe someone could show me how to take apart the dash if they've done it before.

The seat desperately needs to be fixed so I'll bring some bolts, nuts, washers and my cordless drill with some bits and maybe we can figure something out with that.

I'll also bring some cold beer, I can bring my floor jack and jack stands in needed, just let me know.

Warrior
Click to expand...
I have a drill and bits, so we should be good with that. Attached below is what I did for my seat.

uploadfromtaptalk1432251053993.jpg
uploadfromtaptalk1432251070831.jpg
 

Attachments

  • uploadfromtaptalk1432251053993.jpg
    uploadfromtaptalk1432251053993.jpg
    137.5 KB · Views: 106
  • uploadfromtaptalk1432251070831.jpg
    uploadfromtaptalk1432251070831.jpg
    133.3 KB · Views: 115
So the trans cooler won't be here until tomorrow by 8pm so I'll bring everything with me and if we have time to knock it out - great, if not, I'll get it some other time.
 
Guys, I just thought about it. If you have a camping chair, you might want to bring it as I don't have many outside seating options. :)
 
awthorn said:
Yeah, some people wanted to make it but couldn't and I am sure some forgot.

Do you happen to have a cylinder compression checker? If so could you bring it? I have been curious of my compression. Thanks!
Click to expand...
I have a compression tester I'll bring.
warriorwagner said:
01Thunder, I'm in South Tampa so we could certainly meet up and roll out together.

Update on parts:

The cooler should arrive today, if so, I'm planning on going to the base (MacDill) tomorrow and using the lift and installing. I'm sure it'd be much easier putting the truck on the lift. If it arrives tomorrow, I'll bring it with the hoses and clamps, with ATF and maybe we can install. Is there anything else I'll need?

The radio is in, but the wiring harness won't be in until the 26th so I'll have to wait on that, but maybe someone could show me how to take apart the dash if they've done it before.

The seat desperately needs to be fixed so I'll bring some bolts, nuts, washers and my cordless drill with some bits and maybe we can figure something out with that.

I'll also bring some cold beer, I can bring my floor jack and jack stands in needed, just let me know.

Warrior
Click to expand...
Did you want the running boards I have?
awthorn said:
Guys, I just thought about it. If you have a camping chair, you might want to bring it as I don't have many outside seating options. :)
Click to expand...

I keep a chair in my truck for that reason.
 
01thunder said:
Wow. I thought we would have had more than 8 guys total. Anyway, i have some parts left in the garage. Guys tell me what you want/need and i'll look to see if i have it. I have a lot of trim pieces in all colors, weather seals, one leather tan armrest, etc. Cheap prices to get them out!
Click to expand...

Is that leather tan arm rest from a limited model? If so what's a cheap price on it?
 
Scratch me off the list for any projects, my dad wants to take a look at my brakes. However, I have a can of plastidip, I wanted to spray my grille and rear hatch cover. I'll try to help with whatever I can, can't bend as much as I hurt my back - damn I'm old. I'm bringing chips and a few 2 liters.
 
Last edited:
You must log in or register to reply here.

Members online

Total: 380 (members: 3, guests: 377)

Forum statistics

Threads
278,310
Messages
3,554,079
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top