More lift in front or rear?

[Azwelder]

Most BJ spacers and spring lifts I see on here are taller in the back than the front. Usually 1.5" front and 2" rear. Most of what I see for kits online are 2-2.5" front and 1.5" rear. I would think with the rear end sag you would want more lift out back than in the front. Am I wrong? Are they advertising a larger lift in the front that what the bj spacer actually is because of torsion bar adjustability?

 

[fourwd1]

To fix your saggy rear you really need new coil springs.
A spacer is a cheap bandaid.

 

[KidVermicious]

Yes, most balljoint spacer lifts you see advertised as 2.5" are actually 1.5" spacers, and then they tell you somewhere in the fine print to crank your torsion bars.

 

[Azwelder]

I agree with that. I found 2" OME springs, 2" bj spacers, diff drop and four shocks for $513 shipped as a package deal. I think thats the route I'm going to go. Sound like a good price?

 

[fourwd1]

Sounds reasonable. Are the shocks OME too?
The OME stuff is good.

 

[Azwelder]

No, they are Pro Comp.