2007 4Runner SR5 RWD (4.0L, V6) - looking to level front

[JonnyMuck]

Hi,

My vehicle is a 2007 4Runner SR5 RWD (4.0L, V6) with about 140k miles on it.

I've been searching and perusing the various topics on the forums and one thing that strikes me is that all the info being posted usually doesn't quite call out the exact source of the front coils (e.g. vehicle / trim / drivetrain) but gives enough information that the front coils will work with the 4runner.

My intention is to level out the front with the rear of the vehicle using my stock rear spring paired with a Bilstein 5100.

I do not want to use spacers to achieve my lift on the front (using +0.5" spacers on an adjustable shocks I heard is not good due to UCA movement).

My question: Will the 3rd gen Tacoma (2016-2023) TRD off road (not pro) front coils paired with the 4runner Bilstein 5100 at clip 0 raise the front to 2.5" or will it be higher?

Thanks!

 

[kennethnapier]

Probably not exactly 2.5", and likely closer to 1.5–2.0" on a V6 4th-gen 4Runner at the 0 clip, but there is no guaranteed number because Toyota did not design the 3rd-gen Tacoma TRD Off-Road coils as a lift spring for the 4Runner.