Need a favor for gas tank sending unit.

[Bad_Vision]

Ok so the dealer by me wants 280$ for the fuel sending unit.
i would like to know what ohm range the sending unit is, the FSM i downloaded did not work and i cant find a link that works.

So could one of you look that up for me.

 

["JV"]

From the 95 manual

Full ------ (approx) 35mm/0.98in -- (approx) 3 Ohms

1/2 ------ 76mm/2.99in ---------------- 32.5 Ohms

Empty ------ 176mm/6.12in ------------110 Ohms

 

[Bad_Vision]

sorry forgot to say its a 87 any thoughts to that being the same 0-110 ohms

 

["JV"]

Don't know it it's the same or not. You don't have to download the manual, at least I didn't. I tried but it wouldn't work for me. I just use the link to read it off the net. I'll get you the link when I get back home. It's not saved on this computer....

 

[fourwd1]

An 88 is the same as above.

 

[fourwd1]

And if the sender works intermittently (has dead spots), sometimes you can bring it back to life by cleaning the windings with some electrical contact cleaner.

 

[Bad_Vision]

well the idea is im puting a 40 gallon tank in and i wanted to use the stock fuel gauge so im looking to see what sending unit i would inplace.