Need help on the crankshaft pulley

[kaiser]

I am going to go rent the SST from O' Reilly's tomorrow, we will see if its the right one. But my question is..... /sigh..... which was does the bolt turn to loosen. Don't want to turn it the wrong way and mess it up.

here are some pics..

<a href="http://s44.photobucket.com/albums/f29/falkendrifter37/?action=view&current=Photo-0055.jpg" target="_blank"><img src="http://i44.photobucket.com/albums/f29/falkendrifter37/Photo-0055.jpg" border="0" alt="Photobucket"></a>

<a href="http://s44.photobucket.com/albums/f29/falkendrifter37/?action=view&current=Photo-0053.jpg" target="_blank"><img src="http://i44.photobucket.com/albums/f29/falkendrifter37/Photo-0053.jpg" border="0" alt="Photobucket"></a>

 

[Stick Figure]

its a normal right hand thread ... "righty-tighty, lefty loosy" thing.

http://www.yotatech.com/f2/how-remove-crankshaft-bolt-116705/

i usually use the starter trick described in post number 2 in that thread

 

[toytech76]

Just use a 2 ft breaker bar and shallow 19mm socket for the bolt and use a 2ft chain wrench to hold the pulley. Make sure you can get the pulley off after you take the bolt out or you might need to get a puller as well. Dont forget the tensioner tool as well