NEED help, rear yoke beating on linkage

[wcrocco]

hey iv got a 85 22re auto, when im taking off i hear a beating noise under the consol, was under greasing it up this morning and noticed the bolt that connect the rear driveshaft to the yoke are hitting on the bracket on the t-case, any clue why it would do this i really wana get it fixed asap before i destoy something and imput will be greatly appreciated here are a few pics, still kinda new to the toyota set-up thanks

IMG_1209.jpg picture by wcrocco - Photobucket

IMG_1209.jpg picture by wcrocco - Photobucket

IMG_1209.jpg picture by wcrocco - Photobucket

IMG_1209.jpg picture by wcrocco - Photobucket

 

[T-O-Double-D]

Check motor mounts and tranny mounts.
It sounds like your tranny is torquing up enough for them to make contact.:

 

[wcrocco]

i did the motor mounts are fine, and the trany/t-case mount is too, is it the 4wd linkage that its hitting on?

 

[T-O-Double-D]

Definitely the transfer case linkage it's hitting.
Check the mounts for the linkage, Maybe it's dropped some.
Or jack up the transfer case and see where your getting the movement from.

 

[wcrocco]

i did those today the linkage is still good and there was no play in the t-case mount so i removed the driveshft thinking it might be the yoke bearing but no...any other ideas out there