Just joined here and have a few questions.
I just recently purchased a 2000 4runner 4x4 with 115k miles, auto tranny. The PO did the timing belt, water pump and a few other items at 100k. The CEL was on when I got it so I changed the following, all belts, plugs, wires, valve cover gaskets, and brakes (pads and rotors). I then got a P0171 code so I changed the 02 sensor along with the TPS. The CEL then went away. I go to get it inspected and the CEL came on again! I then replaced the MAF.
CEL light went off for about a week. Now its back on and I only got about 170 miles before my fuel light came on.
Just wondering if you all had any ideas on how to trouble shoot my problem.
Also a fresh oil and filter change last week as well.
Sorry for the long winded post.
I just recently purchased a 2000 4runner 4x4 with 115k miles, auto tranny. The PO did the timing belt, water pump and a few other items at 100k. The CEL was on when I got it so I changed the following, all belts, plugs, wires, valve cover gaskets, and brakes (pads and rotors). I then got a P0171 code so I changed the 02 sensor along with the TPS. The CEL then went away. I go to get it inspected and the CEL came on again! I then replaced the MAF.
CEL light went off for about a week. Now its back on and I only got about 170 miles before my fuel light came on.
Just wondering if you all had any ideas on how to trouble shoot my problem.
Also a fresh oil and filter change last week as well.
Sorry for the long winded post.