***************
Dear Singtoe,
You have received an infraction at YotaTech Forums.
Reason: Inappropriate Language
-------
I think you've been here long enough to know YT does not allow such language.
This is a family friendly forum and such language is clearly against the posted
forum rules. Please review them and abide by them in the future.
Your post was removed. Feel free to repost it without all the language as I'm
not going to waste my time editing all that out.
Thanks for your cooperation.
:wabbit2:
-------
This infraction is worth 30 point(s) and may result in restricted access until
it expires. Serious infractions will never expire.
Original Post:
http://www.yotatech.com/f161/1999-4runner-2uz-fe-swap-246027/#post51845921
---Quote---
As you guys are all aware, I am doing my V8 conversion. I can not use the
4runner air filter box nor can I use the Sequoia air filter housing. So i had
to come up with my own.
Any way, I found an enclosed filter housing on e-bay. Neat idea, Lets me grab
cool air from the stock snorkel location.
I order it, pay the $83 and the ****er false advertised it. What an *******
mother ****er **** douche bag. He labels it as a 3" intake but in reality, it is
only a 2.75" intake.
the intake on the 2UZ is 3". Will it be restrictive, I don't know. I am bitter
about the whole situation. I asked for a refund. He declined. I am now
flaming this re****. Basic just to let prospective buyers know not to buy from
KaKa Motors.
Image:
http://i678.photobucket.com/albums/vv145/singtar/4Runner Limited/2012-0
1-03_19-23-39_826.jpg
Image:
http://i678.photobucket.com/albums/vv145/singtar/4Runner Limited/2012-0
1-03_19-23-51_450.jpg
Image:
http://i678.photobucket.com/albums/vv145/singtar/4Runner Limited/2012-0
1-03_19-26-48_711.jpg
Here is his ebay listing (
http://www.ebay.com/itm/110791596728?ssPageName=STRK:M
EWNX:IT&_trksid=p3984.m1497.l2649#ht_1582wt_1270)
---Quote---
Selling Kamotors' Universal Ver.4 Carbon Fiber cold air intake. 100% real
carbon fiber. This is the New Ver. 4 kit with rubber strap. This Filter replaces
the factory airbox and bolts directly to the MAF or AFM(for AFM cars an ebay MAF
adapter is needed).This kit gets a larger volume of air and will outperform just
about any other setup on the market. The filter is enclosed in a 9" by 5" carbon
fiber heat shield canister. I have personally installed this kit in BMW's,
Datsun 280z, zx, Jeep, and VW Jetta. If you engine bay has about 9.5" 5.5"
inches this Filter can be installed installed in about 30minutes.
Picture Number 2 shows the New strap design( It will Have The Kamotors logo on
the body). Picture 1 shows the complete version 4 BMW kit.
Remember this is NOT an auction for a bolt on kit, hoses,clamps or couplers may
be need to install this kit on your vehicle.
Keeps intake temps 50+degrees cooler than an unshielded cone filter setup
and more than 15 degrees cooler than the OEM airbox setup. This kit will fit
everything from BMW's, VW, Subaru, Audi, Nissan, Datsun and much more. I've used
this Filter in many different cars with great results. Filter uses a 3" inlet
and outlet which means that it wont be a restriction, similar kits on ebay only
use 2.5" inlets which will restrict performance, don't be fooled by cheap
imitations, they use a lower quality filters and will not perform as well.
This Auction is for the canister, assorted couplers, and bracket. Please check
other auctions for Full kit for the BMW E30.
Kit includes
1-100% Carbon Fiber canister w/ enclosed air filter 3" inlet outlet stubs
The filter uses a pointed cone tip to help straighten turbulent air.
3- assorted coupler, which you may or may not need.
1-New Ver.4 rubber lip metal filter bracket
1-Straight bracket
Feel free to email me if you have any questions.
With this Filter you can have a true Cold Air Intake. Usually when people
want to get a cold air setup they end up removing there high beam or cutting a
hole in the car to get air from below, but with this kit you can easily redirect
air from the grill or valance into the filter. The cooler the air, the more
power. If you are just using a cone filter you are actually losing power because
of the hot engine bay air your filter is breathing.
A heat shield blocks the hot air but you aren't really getting cooler
outside air to your filter unless you have this CAI setup. The canister has a 3"
inlet which lets you direct out side air into your filter, with this kit your
filter won't reach temps above the outside air temp.
The filter is completely enclosed in a Carbon Fiber shield. Since no
separate shield is needed or would be a benefit, installing the kit is a breeze
and you get much more freedom on deciding how you want it mounted.
This kit will give a performance gain and a very unique sound that's only
possible with a carbon fiber enclosed filter. Gives better throttle response,
MPG(if driven normal), power, and cooler Intake air temps.
Do not install the bracket to any ground points on the vehicle.
Shipping usually takes no more than 48hrs but can take up to 5 days, if the
shipping is delayed for any reason I will contact you and ship it out with a
faster service so you still get your item in a timely manner. Please be patient,
and contact me when ever you want for order updates or questions.
Customer reviews
"the first thing I noticed was better throttle response with the CAI"
"I can vouch for this product."
"High quality on the products I obtained. I was very pleased. Thanks to you!"
"I have one of these CAIs and it is great!
I feel a little bit of added acceleration in 3rd and 4th.
awesome product!"
"Just posting to let anyone on the fence about getting one of these know that
they will not be disappointed. A perfect compliment to the miller maf
conversion."
"Recieved mine from KA Motors. Let me tell you... I'm super happy. It's a very
clean install and clean product. Looks FANTASTIC on just about any application.
Very well worth it "
"intake is cool to the touch on my M42 with this thing installed, thanks for a
quality product "
"Good seller, good product, great price, quick shipping. What else can you ask
for?"
"I bought a KA Motors carbon intake for my E30 318iS and love it.
I removed the muffler thing on the end of it though and just have the pipe
feeding into it without the 3 inch cover thing on the end, sounds a LOT better
this way!"
---End Quote---
---End Quote---
All the best,
YotaTech Forums
***************
Again, please do not reply to this email. You must go to the following page to
reply to this private message:
http://www.yotatech.com/private.php
All the best,
YotaTech Forums
