Official Army Green 2020 TRD Pro thread

[gSwift]

So if the 2020 exhaust is not to my liking, it is a very easy change? What would parts of stock exhaust cost? My only hesitation with this truck is this exhaust but if it’s an easy swap out then it’s not much of a risk in case I do not care for it

Its a easy and direct swap with a non-TRD exhaust, but as far as cost goes, I have no idea since I swapped with a forum member that had a 2020 ORP.

If you dislike the exhaust, post it up here. I'm sure there are plenty of people that would trade you.

 

[nimby]

I'm upgrading to the Morimoto XB LED headlight. No pics yet since i'm not done, but as far as the Safety Sense, it was just 1 plug in the center of the grill and then all of the other steps were the same.

Theres several videos on YouTube of bumper removals then just add that one step and you're good.

Are you saying that you disconnected Safety Sense completely or that you just unplugged it and re-installed it on the new bumper?

 

[gSwift]

Are you saying that you disconnected Safety Sense completely or that you just unplugged it and re-installed it on the new bumper?

I don't have a new bumper, just installing new headlight assemblies. In order to do so, you must remove the front bumper. RusPro was inquiring about removing a bumper with Safety Sense.

Its one additional plug and then all the other bumper removal steps are the same. I didn't actually remove Safety Sense

 

[RusPro17]

Are you saying that you disconnected Safety Sense completely or that you just unplugged it and re-installed it on the new bumper?

That is what Gswift said. There is one plug for the safety sense to unplug to take the front fender off. There is you tube video out how to remove the front bumper. But nothin yet on video about the safety sense plug. That is why I asked him. Because I plan on doing the same to replace my headlights but you need to remove the front bumper to be able to
Do that. When you install the front bumper you plug the safety sense plug back in.

 

[gSwift]

Do you have a straight on front shot?

Here is a shot from straight on for you.

Also, a good picture with the new headlights

 

[Crush2.0]

Here is a shot from straight on for you.

Also, a good picture with the new headlights

You don’t mess around with getting mods done! I’ll be curious to know how lights are and rough est on install time?
What’s next?

 

[Steel28]

Here is a shot from straight on for you.

Also, a good picture with the new headlights

Truck looks UNREAL. Damn, I must buy.

 

[d1nguyen]

Truck looks UNREAL. Damn, I must buy.

Looks great

 

[ForRun]

Here is a shot from straight on for you.

Also, a good picture with the new headlights

Just wondering if they fixed the zero light output issue upfront and close. I had these in my 19 and sent them back. When your in a dark unlit neighborhood couldn't see squat around corners. Many just run the fogs to make up for it. I'm waiting to see if they fix that before buying again, thanks

 

[gSwift]

You don’t mess around with getting mods done! I’ll be curious to know how lights are and rough est on install time?
What’s next?

I'd say install time from start to finish was about 2 hours. That doesn't count time to aim them... I'm still fine tuning that. lol

Light output definitely beats the OEM halogens, but also has some dark areas that have been well documented in the tread for the lights. In the end, I like they way they look aesthetically and don't drive at night a lot and when I do, I generally run my fogs, so for me i'm happy with them.

As far as other mods, i'm still waiting on my roof rack and i'm fighting the urge to go ahead and do the Icon lift. I have the 2/1.5 Cornfed, and have no complaints at all, but if I was gonna lift it I should have done it right to start with. Thats the only place i've kinda skimped on money and that should have been the last place I skimped.

Guess i just like doing stuff twice. :wacko:

 

[gSwift]

Just wondering if they fixed the zero light output issue upfront and close. I had these in my 19 and sent them back. When your in a dark unlit neighborhood couldn't see squat around corners. Many just run the fogs to make up for it. I'm waiting to see if they fix that before buying again, thanks

Yeah I followed several of your posts regarding the lights. I love the appearance of them but I now understand everyones complaints on them. The dark spots are definitely there and if someone doesn't like running fogs on the street then they will be a problem indeed.

But to answer your question, no it's not fixed. But DAMN they look good in every other application.

 

[alxdo2]

Here is a shot from straight on for you.

Also, a good picture with the new headlights

What headlights are these...?

 

[gSwift]

What headlights are these...?

Morimoto XB... There's a huge thread on these.

2014+ T4R Tri-LED Projector / Sequential Headlights

 

[alxdo2]

Morimoto XB... There's a huge thread on these.

2014+ T4R Tri-LED Projector / Sequential Headlights

Thank you sir. Ordering a pair for my new T4R! Thanks!

 

[gSwift]

Perfect day to get outdoors with the dogs.

 

[d1nguyen]

Beauty! lovely dogs too. Are those 285/70s on your rig?

 

[gSwift]

Beauty! lovely dogs too. Are those 285/70s on your rig?

Yes sir, 285 Ridge Grapplers

 

[gSwift]

My son and i installed a new set of Shrockworks Sliders. I love the clean, low profile look of these.

 

[gSwift]

Got rid of the chrome Altezza looking tail lights today. I think these are much better and the fitment was perfect. They look 100% OEM just without the chrome

 

[ForRun]

Got rid of the chrome Altezza looking tail lights today. I think these are much better and the fitment was perfect. They look 100% OEM just without the chrome

Looks great! Where can one buy these? Thanks