Official T4R "Firearms" thread

[apohl17]

Figured I'd show you peeps my first ever AR I have been building up over the last month or so...

-Korstog Arms upper, BCG
-Voodoo 20" 5.56 fluted barrel
-Samson Evo 15" HG
-Adams Arms Jet comp
-BCM Mod 3 CH & grip
-SOTA Arms Billet lower
-RTB ENT trigger & internals
-Magpul BAD
-PRS Gen II stock
-Vortex DB 4-12x40 scope on a Warne X-Skel mount

Can't say enough about the ease of shooting this thing...what do you guys think?

 

[Drobs]

Picked these 2 up at a garage sale last week for $300 each.

Winchester model 97 from 1927. This is the gun that really caught my eye as I've been slowly looking for a shotgun to finish my cowboy action gun collection.

Seller wanted $350 for this one, I offered $600 of the pair and he accepted it.
Milled Norinco Mak-90:

 

[RO1973]

Picked these 2 up at a garage sale last week for $300 each.

Winchester model 97 from 1927. This is the gun that really caught my eye as I've been slowly looking for a shotgun to finish my cowboy action gun collection.

Seller wanted $350 for this one, I offered $600 of the pair and he accepted it.
Milled Norinco Mak-90:

Nice score. My kind of garage sale.

 

[Drobs]

Just wanted to note, I used the Winchester Model 97 in my 1st ever cowboy action shoot today. It worked just fine for a 92 year old shotgun. Also had my pair of Uberti 1873 revolvers along and Rossi 1892 lever action, all 3 are modern reproductions in 38 special.

Being my 1st time out, I just shot for fun instead of trying to race the clock. Did manage to take all 5 stages "clean" with no misses. I had a good time.

 

[SHagood]

 

[Blue109]

Suns out....

 

[Rekkr]

The Gf and I spend a lot of time at the range and are about to start competing in 3 gun. That’s her new armalite m15 competition gun that she is excited to break in. And my trusty rifle which feels like a brick compared to hers ��

 

[Seattle206]

Picked these 2 up at a garage sale last week for $300 each.

Winchester model 97 from 1927. This is the gun that really caught my eye as I've been slowly looking for a shotgun to finish my cowboy action gun collection.

Seller wanted $350 for this one, I offered $600 of the pair and he accepted it.
Milled Norinco Mak-90:

Wow, amazing deal on that milled Mak! I can't even find a used stamped Mak for any less than $700. I'd totally restore it with a Polytech spiker front sight, IWD T56 furniture, and a rear weld by Two Rivers Arms or Turbothis.

 

[Drobs]

Wow, amazing deal on that milled Mak! I can't even find a used stamped Mak for any less than $700. I'd totally restore it with a Polytech spiker front sight, IWD T56 furniture, and a rear weld by Two Rivers Arms or Turbothis.

I do like that spiker. Seeing these Mak-90's sell for $700 to $900 on gunbroker. Tempted to put it on there as-is with a starting price of $600 and see what happens.

I have a bunch Romanian stamped AK's. Built 4 from kits back in the day when kits were cheap + had a SAR-1 to start with. Added a Serbian M92 AK pistol a few years back.

Finding myself drawn towards AR15's more often now, and just assembled my 3rd PSA pistol bringing my AR count up to 4.

 

[LandCruiser]

Moved to Commiefornia, dumped my most of my ARs for pennies on the dollar, gave the nicer ones to dad.

Yep, this state blows.

 

[mrblah]

Moved to Commiefornia, dumped my most of my ARs for pennies on the dollar, gave the nicer ones to dad.

Yep, this state blows.

tell me about it, the CA DOJ sent 3 goons in body armor to "inspect" my toys at 7am due to some paperwork i submitted with the CA DOJ.

They gave me a choice:

1. I can voluntarily let them inspect right then and now, in my home, and if I was found in violation, I can voluntaringly hand over my toys for destruction, and they wouldn't press charges. This was a one time only deal.

Or.

2. I can refuse the inspection, but I had to answer some questions regarding my toys, and depending on how I answer those questions, they may have to come back with a felony warrant.

conclusion: I told them to pound sand, and closed my front door on them. One of the agents called me a few minutes later from my driveway, saying I still had to answer their questions, but I can do it over the phone. I said, "No I don't" and hung up. Two weeks later, and my required paperwork got approved.....so I guess i wasted a bunch of taxpayers money that morning.

Yes, welcome to california....

 

[Blue109]

I have a hardon for PRI handguards. Unfortunately all three of these were lost at sea during my last wheeling session in the middle of the desert when my boat tragically sank after a big wave hit it and it rolled off a clif into a volcano.

****theATF

 

[giguchan]

Moved to Commiefornia, dumped my most of my ARs for pennies on the dollar, gave the nicer ones to dad.

Yep, this state blows.

Wait.... you're in Walnut Creek? you must be doing ok.... pretty Posh Area... i have People there.. you either went there for a woman or a very good job!

Good luck.

 

[LandCruiser]

Wait.... you're in Walnut Creek? you must be doing ok.... pretty Posh Area... i have People there.. you either went there for a woman or a very good job!

Good luck.

Great woman, average job, lol.

 

[giguchan]

Had to be one or the other..... Rarely both.... sorry about the Hardware.... I was almost in the same situation... but to the UK and then Asia....Nothing fun there... get locked up for a sling shot.
Back in NY.... better.. but not by much.

Best of luck man..

 

[NoGaRunner]

Figured I'd show you peeps my first ever AR I have been building up over the last month or so...

-Korstog Arms upper, BCG
-Voodoo 20" 5.56 fluted barrel
-Samson Evo 15" HG
-Adams Arms Jet comp
-BCM Mod 3 CH & grip
-SOTA Arms Billet lower
-RTB ENT trigger & internals
-Magpul BAD
-PRS Gen II stock
-Vortex DB 4-12x40 scope on a Warne X-Skel mount

Can't say enough about the ease of shooting this thing...what do you guys think?

Looks like a nice setup. Very similar to what I've been picturing in my head - I have a lower and a scope waiting to be slapped onto something.

 

[apohl17]

Looks like a nice setup. Very similar to what I've been picturing in my head - I have a lower and a scope waiting to be slapped onto something.

Thanks man! I actually just threw in a Rise Armament RA-140 SST over a mil-spec variant trigger assembly, and that made a world of a difference. This thing is a dead ringer with that 68gr Frontier BTHP round.

 

[LandCruiser]

Just looked up what I need to do to get a CCW in my may issue county...

:|

 

[ran]

When I lived in Monterey county, I don't think they were issuing any more. I took my S&W's and AR and moved out of state.
_________________
2007 SE V6 Titanium

 

[LandCruiser]

When I lived in Monterey county, I don't think they were issuing any more. I took my S&W's and AR and moved out of state.

It's may issue with good cause. CCC Sherrif issues like 300 of them a year. You need to give money to the Sheriff's department, not even have a SPEEDING TICKET in your background check, and two letters of recommendation from the Sheriff's Posse saying you're of good moral standing.

Wish we had a gun rights president and Congress that would pass CCW reciprocity and I could just use my FL permit here.