OME installed, VSC, ABS, TPM lights on

[Desert Cowboy]

Hey all-

I recently had my OME lift installed, I had the Xreas pulled out.
When I got it back from the shop, my vsc off, vsc lights, abs lights
and tpm lights are all on.

Any Ideas what it could be before I take it in?

 

[Mike07SE]

You need to perform a 'zero-point' calibration. The attitude of the truck has changed and you have to let the computer know this sometimes. Do a search and see what you come up with.

 

[Desert Cowboy]

I will try that, I just found some instructions are here on how to do it.

Thanks

 

[CJ3Flyr]

I will try that, I just found some instructions are here on how to do it.

Thanks

If that doesn't get it inspect the ABS sense wires on the front wheels. They are very fragile and more than one lifter has learned the hard way. You can buy just the wire reasonably. This thread tells the tale of two other members and has some parts links: http://www.toyota-4runner.org/showthread.php?s=&threadid=42630
:cheers: