U
Register to hide this ad
DallasTRDPro
Member
Definitely don't see the point in this product.
Gamma Ray
Banned
You've got to be a gigantic prick to use one of these things. Look at that huge, probably copyright-infringing, 4Runner logo designed into it. Why does that need to be there? That's plenty of space up high that you could be using, but you're not going to be using it because you've got a gargantuan Supreme sticker on the back of your truck. And how much clearance between the panel and the glass is there, really? And this is without questioning the structural support it may or may not have. Are there sturdy screw holes like side panels have? I haven't gone looking in intense detail at the spot that this **** you panel fastens to, but I don't remember seeing easily removable panels that would likely have holes to screw into. Are you just drilling into the plastic and mounting it there?
michalik.piotr6837
New member
Holly shiiit, all the hate and anger. Don’t like it? Don’t buy it. Simple. Damn. So we are now going to dump on a guy/company in the US that designs and fabs decent products? What have you contributed lately?
Yes, would be nice for dogs, maybe attach a rifle or whatever as long as panel is secure.
Yes, would be nice for dogs, maybe attach a rifle or whatever as long as panel is secure.
Gamma Ray
Banned
Made in the USA isn't a get out of jail for being a dillhole free card.
And nothing for nothing, if I can't see how this thing fastens to the truck before I buy it, I'm not buying it and considering it suspect. The pay gated and time limited instructions just make me not want to buy it and consider it suspect even more.
Old Tanker
Member
He makes a solid product, and personalizes the build if you'd like. If you have a question about the mounting just ask him. I think the pay gate is to protect his design so a CHICOM copy isn't on the market before Labor Day.
But I need this to flex on my IG!
Show us on the doll where the bad man touched you
Grug556
New member
What about my Spetsnaz mini shovel with throwing abilities and a razor sharp blade? Shit its not like it will fit under the seat!!
But according to you hatchets are good to go..what about my shovel!!!:laugh:
Whippersnapper02
Senior Member
Maybe people will like it once you add raptor lights to it.
U
USStrongman
Guest
Wow, whata-Kunt you are today. Someone piss in your ear? As for the logo, I am guessing you have a T4R forum sticker on your rig? Did you know TR4 is a registered trademark? Toyota clearly would rather have the exposure than worry about a bunch of kids with copyright infringement stickers on their rigs?
There are a lot of off-roaders/overlanders who took the 4th gen version and made it work with 5 gens, so ya, there is a market. There was a post about it on this site in the past few weeks.
I am buying one as a means to keep better track of bags, etc for my trip to Patagonia. Ever go out in BFE foreign lands for 12 weeks and not have a Toyota dealer or McDonalds at your beckon call? Guessing not. I have Orange Boxx side panels. Work fantastic. One side is recovery gear, tools, spare parts. Other side is first aid, fire extinguisher, CO2, more recovery gear. The rear panel will free up space in my overland trailer. Food, indoor Rotopax water, etc.
And FWIW... English isn't their first language and they were the first company to offer Molle panels for 5th gens.
Sorry my post didn't meet your mall crawler/fast and furious image of awesome. In the meantime, piss off. And yes, I am a gigantic prick!
There are a lot of off-roaders/overlanders who took the 4th gen version and made it work with 5 gens, so ya, there is a market. There was a post about it on this site in the past few weeks.
I am buying one as a means to keep better track of bags, etc for my trip to Patagonia. Ever go out in BFE foreign lands for 12 weeks and not have a Toyota dealer or McDonalds at your beckon call? Guessing not. I have Orange Boxx side panels. Work fantastic. One side is recovery gear, tools, spare parts. Other side is first aid, fire extinguisher, CO2, more recovery gear. The rear panel will free up space in my overland trailer. Food, indoor Rotopax water, etc.
And FWIW... English isn't their first language and they were the first company to offer Molle panels for 5th gens.
Sorry my post didn't meet your mall crawler/fast and furious image of awesome. In the meantime, piss off. And yes, I am a gigantic prick!
SantaFeTrailer
New member
Unfortunately I cannot recommend this product at this time.
I ordered it a while back. I actually had it custom made (reasonable upcharge) with larger openings because I was intending to use it for the dogs, not for mounting my bug out gear. I see that they now list that version as well, so I guess I'm happy to participate in paying for the R&D.
The issue is that it does not fit right. When it is aligned with the top of the rear window recess, the sides do not follow the same angle, so there is a significant gap between the panel and the side of the recess. Also, right at the top it is too wide so it does not actually fit in the recess.
I sent Orangeboxx photographs of these issues, and asked about 1) it not fitting in the recess and 2) my concern about running those self tapping screws in to the hatch and it appearing that they may interfere with the window, because they are very close to it even without the misfit.
It's been a week and so far crickets. I will try to call them today, but at this point I am out over $300 and have a panel that doesn't fit, and even if I take a belt sander to the corner so it fits in the recess, I am not going to risk ruining my window without confirmation that it will clear the screws.
Stand by, I will report back.
EDIT: Well I never heard back from OB after sending them a video detailing how the panel does not fit in the recess of the hatch. I showed where it is too wide, and where it is not tall enough. I went ahead and ground down the too-wide part, and screwed it in where I could. It seems secure enough, and hopefully will hold and not rattle. It looks like crap, and I'm not that happy all around.
After modding it, I got an email from MuttManagers, which I had previously contacted and they said they have developed a solution. Here is their info:
Sue Stipanovich
MuttManagers, LLC|Owner
15832 NE 156th Street
Woodinville, WA 98072
[email protected]
253.222.5214
www.muttmanagers.com
I ordered it a while back. I actually had it custom made (reasonable upcharge) with larger openings because I was intending to use it for the dogs, not for mounting my bug out gear. I see that they now list that version as well, so I guess I'm happy to participate in paying for the R&D.
The issue is that it does not fit right. When it is aligned with the top of the rear window recess, the sides do not follow the same angle, so there is a significant gap between the panel and the side of the recess. Also, right at the top it is too wide so it does not actually fit in the recess.
I sent Orangeboxx photographs of these issues, and asked about 1) it not fitting in the recess and 2) my concern about running those self tapping screws in to the hatch and it appearing that they may interfere with the window, because they are very close to it even without the misfit.
It's been a week and so far crickets. I will try to call them today, but at this point I am out over $300 and have a panel that doesn't fit, and even if I take a belt sander to the corner so it fits in the recess, I am not going to risk ruining my window without confirmation that it will clear the screws.
Stand by, I will report back.
EDIT: Well I never heard back from OB after sending them a video detailing how the panel does not fit in the recess of the hatch. I showed where it is too wide, and where it is not tall enough. I went ahead and ground down the too-wide part, and screwed it in where I could. It seems secure enough, and hopefully will hold and not rattle. It looks like crap, and I'm not that happy all around.
After modding it, I got an email from MuttManagers, which I had previously contacted and they said they have developed a solution. Here is their info:
Sue Stipanovich
MuttManagers, LLC|Owner
15832 NE 156th Street
Woodinville, WA 98072
[email protected]
253.222.5214
www.muttmanagers.com
Last edited:
SantaFeTrailer
New member
photos:
iCloud
iCloud
Unfortunately I cannot recommend this product at this time.
I ordered it a while back. I actually had it custom made (reasonable upcharge) with larger openings because I was intending to use it for the dogs, not for mounting my bug out gear. I see that they now list that version as well, so I guess I'm happy to participate in paying for the R&D.
The issue is that it does not fit right. When it is aligned with the top of the rear window recess, the sides do not follow the same angle, so there is a significant gap between the panel and the side of the recess. Also, right at the top it is too wide so it does not actually fit in the recess.
I sent Orangeboxx photographs of these issues, and asked about 1) the it not fitting in the recess and 2) my concern about running those self tapping screws in to the hatch and it appearing that they may interfere with the window, because they are very close to it even without the misfit.
It's been a week and so far crickets. I will try to call them today, but at this point I am out over $300 and have a panel that doesn't fit, and even if I take a belt sander to the corner so it fits in the recess, I am not going to risk ruining my window without confirmation that it will clear the screws.
Stand by, I will report back.
2021nightshade4x4
New member
Unfortunately I cannot recommend this product at this time.
I ordered it a while back. I actually had it custom made (reasonable upcharge) with larger openings because I was intending to use it for the dogs, not for mounting my bug out gear. I see that they now list that version as well, so I guess I'm happy to participate in paying for the R&D.
The issue is that it does not fit right. When it is aligned with the top of the rear window recess, the sides do not follow the same angle, so there is a significant gap between the panel and the side of the recess. Also, right at the top it is too wide so it does not actually fit in the recess.
I sent Orangeboxx photographs of these issues, and asked about 1) it not fitting in the recess and 2) my concern about running those self tapping screws in to the hatch and it appearing that they may interfere with the window, because they are very close to it even without the misfit.
It's been a week and so far crickets. I will try to call them today, but at this point I am out over $300 and have a panel that doesn't fit, and even if I take a belt sander to the corner so it fits in the recess, I am not going to risk ruining my window without confirmation that it will clear the screws.
Stand by, I will report back.
Makes me wonder if the test vehicle had body damage that was repaired or even unbeknownst to the fabricators.
Sent from my iPhone using Tapatalk
SantaFeTrailer
New member
Perhaps could have, but it would seem surprising that the window recess changed shape that much and the window still worked? In any event, we'll never know since they haven't replied after almost a month (I sent them my email with videos on May 21).
I'm not one to trash talk a company lightly, but based on my experience, stay away from Orange Boxx.
I'm not one to trash talk a company lightly, but based on my experience, stay away from Orange Boxx.
