Parting Silver 2000 4Runner SR5 4WD Marysville, WA

[t4rFL]

looking for the mirror assembly including inside parts; also looking for the clock for the newer 3rd gens.

 

[DeathCougar]

looking for the mirror assembly including inside parts; also looking for the clock for the newer 3rd gens.

Not quite sure what you mean by inside parts?

I have clocks $35

 

[Andy in Pa]

[MENTION=108845]Andy in Pa[/MENTION] I have this for $25+$12 ship, so $37 total

Paypal [email protected]

Thanks!
Josh

There are no differences between a 2000 and a 99 (mine is a 99) correct? Forgive the newb question, I am still learning some things about 4R's.

 

[DeathCougar]

There are no differences between a 2000 and a 99 (mine is a 99) correct? Forgive the newb question, I am still learning some things about 4R's.

Correct same market lens 99-02

 

[t4rFL]

Not quite sure what you mean by inside parts?

I have clocks $35

one of these pieces is broke on my mine, therefore every bump, my mirror falls out of place. i just need these parts, but willing to buy the whole assembly if you wont sell separately....if not too costly.

i will take a clock as well, but a pic first....my t4r did not come with one.

 

[DeathCougar]

one of these pieces is broke on my mine, therefore every bump, my mirror falls out of place. i just need these parts, but willing to buy the whole assembly if you wont sell separately....if not too costly.

i will take a clock as well, but a pic first....my t4r did not come with one.

I sell the complete mirror assembly, not just the roll pin. Is yours a Limited? With the tan interior, looks like? I have a good mirror assembly with base and roll pins (I sell as the assembly) for $25

 

[t4rFL]

I sell the complete mirror assembly, not just the roll pin. Is yours a Limited? With the tan interior, looks like? I have a good mirror assembly with base and roll pins (I sell as the assembly) for $25

no, mine's gray interior (SR5) pic was from the internet

 

[DeathCougar]

no, mine's gray interior (SR5) pic was from the internet

Ok, if you have an 01 then I don't have the correct color. You need 01-02, which is different from 99-00. This particular setup from this Silver truck I already sold, but was the Bluegray moonmist color anyways instead of the Grey grey that you need.

 

[t4rFL]

Ok, if you have an 01 then I don't have the correct color. You need 01-02, which is different from 99-00. This particular setup from this Silver truck I already sold, but was the Bluegray moonmist color anyways instead of the Grey grey that you need.

ok, thanks...i'll still buy the clock...paypal...shipped to 32820

 

[DeathCougar]

ok, thanks...i'll still buy the clock...paypal...shipped to 32820

Shipping $7 so total $42 shipped

Paypal [email protected]

Thanks!

 

[Andy in Pa]

one of these pieces is broke on my mine, therefore every bump, my mirror falls out of place. i just need these parts, but willing to buy the whole assembly if you wont sell separately....if not too costly.

i will take a clock as well, but a pic first....my t4r did not come with one.

FYI this droopy mirror problem is not a hard fix. I took mine apart and added a rubber gasket inside that I cut from an old tire tube. It works great again!! If you take it apart, it will make sense where to put it.

A.

 

[Andy in Pa]

Correct same market lens 99-02

Ok, I am going to try a bit harder to source one locally.
Thanks,
A.

 

[Ironman707]

What are the chances of you still having the front left fender flare plus the front left running board boot?

 

[WATony]

Good to meet you yesterday Cougar. Thanks for the parts.

 

[DeathCougar]

Ok, I am going to try a bit harder to source one locally.
Thanks,
A.

So....now you don't want my part now that I have given you the interchange?

What are the chances of you still having the front left fender flare plus the front left running board boot?

[MENTION=130659]Ironman707[/MENTION] Sold those with the flare set, sorry!

Good to meet you yesterday Cougar. Thanks for the parts.

[MENTION=90421]WATony[/MENTION] You too, thanks again pleasure doing business with you!

 

[t4rFL]

Shipping $7 so total $42 shipped

Paypal [email protected]

Thanks!

sent the payment yesterday

 

[Andy in Pa]

So....now you don't want my part now that I have given you the interchange?

No, but I understand why you would think that, sorry. Just found a local source in Pa near me that I had not heard back from yet (before I posted in this thread).

 

[DeathCougar]

sent the payment yesterday

Got it, I'll get that sent!

No, but I understand why you would think that, sorry. Just found a local source in Pa near me that I had not heard back from yet (before I posted in this thread).

Alright, well just keep me in mind when you need parts. I have plenty!

 

[MKERunner]

How about the gas tank skid? If available can you send photos & price/shipping to 53204?

 

[DeathCougar]

How about the gas tank skid? If available can you send photos & price/shipping to 53204?

[MENTION=119283]MKERunner[/MENTION] Sorry, sold locally. These are far too large to attempt to ship as well, due to the large mount standoffs.