Pic request: paging all a340f owners!

[TheDeafElectrician]

First off, let me say I appreciate all of the information this group has archived here. GREAT stuff.

The issue I am having is the wire positions for the female (harness side) connector on the internal wiring harness for the lockout,A, and B solenoids.

-I have 2 4Runners in my garage and the 97 Ltd has a 2-wire while the 01 sr5 has a 5-wire connection in a grey 8-pin housing (90980–11190). So I am not able to utilize the 97 as a reference.

-Is it possible someone could either point me in the direction of the correct diagram or take a picture of the wire connections for me?

I am currently stuck in limp mode so my vehicle is stranded.

Thanks for any help ahead of time. Have a nice night!

 

[TheDurk]

First off, let me say I appreciate all of the information this group has archived here. GREAT stuff.

The issue I am having is the wire positions for the female (harness side) connector on the internal wiring harness for the lockout,A, and B solenoids.

-I have 2 4Runners in my garage and the 97 Ltd has a 2-wire while the 01 sr5 has a 5-wire connection in a grey 8-pin housing (90980–11190). So I am not able to utilize the 97 as a reference.

-Is it possible someone could either point me in the direction of the correct diagram or take a picture of the wire connections for me?

I am currently stuck in limp mode so my vehicle is stranded.

Thanks for any help ahead of time. Have a nice night!

Without access to a 2001 EWD, it's hard to give a 100% positive answer. The 2002 is available on-line...thing is, the relevant plug, while it is a gray 8-pin with five wires, is p/n 90980-10891. That plug is diagrammed in the first attachment below, as plug E2 on Page K. It is identical to yours in all respects that I can identify in the connector manual (too large to post). Same format, locking tabs, numbering, everything.

The wire colors to plug E2 are shown in the second attachment at the bottom of page 136. I would say that if the wire colors match what you have, and the plug looks the same, I'd ignore the plug connector p/n difference and wire as shown. Or spend a few bucks on TIS and get these pages from the '01 EWD if it doesn't.

 

[TheDeafElectrician]

Without access to a 2001 EWD, it's hard to give a 100% positive answer. The 2002 is available on-line...thing is, the relevant plug, while it is a gray 8-pin with five wires, is p/n 90980-10891. That plug is diagrammed in the first attachment below, as plug E2 on Page K. It is identical to yours in all respects that I can identify in the connector manual (too large to post). Same format, locking tabs, numbering, everything.

The wire colors to plug E2 are shown in the second attachment at the bottom of page 136. I would say that if the wire colors match what you have, and the plug looks the same, I'd ignore the plug connector p/n difference and wire as shown. Or spend a few bucks on TIS and get these pages from the '01 EWD if it doesn't.

TY. That was exactly what i was looking for.