Post-Lift Regret? [a bunch of questions for those of you with built trucks]

This is what I needed to hear. I think I'm just gonna build my truck into a more capable yet still stock 4runner. Fresh springs front and rear and 31 or 32 inch tires. I'm gonna have 4.30's in it soon, so it will maintain power at the larger stock tire size, and the e-locker combined with slightly larger tires will make it more effective off road. I may add some rock sliders and skids as well to protect it. Basically what I discussed with Absalom earlier.

I wheel the truck a lot, but ultimately I cannot afford another vehicle and I want to hold on to my 3rd gen for as long as humanly possible. It's a weekend wheeler in New Jersey- I don't need a fully built expedition rig. I just need to convert it to the BEST off road performing stock 4runner, because right now it is objectively the worst with the low springs and smaller stock tire. I may hide a winch in my stock front bumper as well. It will be a happy medium, because I really don't need to go all out for my purposes. It wouldn't be worth it with the amount of road driving i do. Basically I'm gonna beef it up to a 99 Highlander with the e-locker, instead of the low 2002 with camry tires.

A lot of this also stems from the fact that I just don't trust the IFS for serious off road abuse. The ball joints tend to fail with a ton of weight on the front, and the cv's start to break with larger lifts. I'd rather keep my stable and reliable stock setup and not have to worry about it, even if I have to opt to go around some obstacles.
There's at least 19,000 solutions to running a winch without needing a gigante plate bumper hanging off the front.

- Brace connecting the end of frame caps could be fab'd
- Receiver hitch mounted winch
- Hand winch, etc

I think you'll be happy with what you've chosen. Keep us posted!
 
There's at least 19,000 solutions to running a winch without needing a gigante plate bumper hanging off the front.

- Brace connecting the end of frame caps could be fab'd
- Receiver hitch mounted winch
- Hand winch, etc

I think you'll be happy with what you've chosen. Keep us posted!

I've basically gotten my plan straight!

-rear locker and 4.30 gears
-99 coils up front and fresh OEM 99 shocks
-OME 906 coils in the back, havent decided on shocks yet
-4xinnovations rock sliders
-savage full skid plate set
-other protection such as rear control arm skids, diff skid to protect my locker actuator
-SCS F5 wheels (16x6 3.5'' BS) wrapped with 265/75r16 BFG AT T/A KO2
-possibly going to mount a warn winch with synthetic line on the front, hidden inside the bumper
-Safari snorkel

It's gonna be insane off road and should still be relatively road-worthy as well. The sensitive components of the front suspension should be unaffected with the mild 1'' lift (within OEM spec), and the rear coils will be able to handle work tasks and will not sag, providing a modest 1'' of rake.
 
I've basically gotten my plan straight!

-rear locker and 4.30 gears
-99 coils up front and fresh OEM 99 shocks
-OME 906 coils in the back, havent decided on shocks yet
-4xinnovations rock sliders
-savage full skid plate set
-other protection such as rear control arm skids, diff skid to protect my locker actuator
-SCS F5 wheels (16x6 3.5'' BS) wrapped with 265/75r16 BFG AT T/A KO2
-possibly going to mount a warn winch with synthetic line on the front, hidden inside the bumper
-Safari snorkel

It's gonna be insane off road and should still be relatively road-worthy as well. The sensitive components of the front suspension should be unaffected with the mild 1'' lift (within OEM spec), and the rear coils will be able to handle work tasks and will not sag, providing a modest 1'' of rake.
Let me save you close to $1,000:

Skid plates

One of like 40 options for 1/2 the price


Outscored Warn in several different shootouts



Much cheaper snorkel option


You might consider the Bilstein 5160 rear shocks once they are released later this year.
 
Let me save you close to $1,000:

Skid plates

One of like 40 options for 1/2 the price


Outscored Warn in several different shootouts



Much cheaper snorkel option


You might consider the Bilstein 5160 rear shocks once they are released later this year.

I'll definitely get those skids. am I SOL for front recovery points or can i manage to have my tow hooks up front still? in the oem spot?

Should I get a 3/16th gas tank skid?

The winch looks good, ive heard good things about engo and 60lbs seems perfect.

Thanks again for all of your help.

Edit: I may forgo the snorkel, but I do a surprising amount of water crossing and I'd like to have the peace of mind. I've already extended my diff breathers and water sealed engine components, so I figured I may as well go the whole nine yards.
 
Last edited:
Let me save you close to $1,000:

Skid plates

One of like 40 options for 1/2 the price


Outscored Warn in several different shootouts



Much cheaper snorkel option


You might consider the Bilstein 5160 rear shocks once they are released later this year.

That's a good looking winch. Do you know on what parts it out performed the warn ? I'm wondering if the solenoid is removable ? One think I don't like is only 1 year warranty on electrical. Smittybilt has I think 3-5 on electrical.
 

Members online

Forum statistics

Threads
278,315
Messages
3,554,131
Members
248,016
Latest member
Advally Service

Trending content

Back
Top