DannyLlama - ProComp's customer service has been great, and they've sent me two sets of replacement screws, and a set of replacement center caps. I've replaced the screws all around (removed carefully, cleaned the holes with acetone, carefully threaded the replacements, used thread locker, and have been having better luck with the later sets, although some are still chipping/peeling. I will keep requesting replacements as long as they keep chipping, and as long as ProComp keeps sending them to me. I haven't put the new center caps on yet, but I will soon, since all four look awful, having chipped and peeled almost entirely to bare metal. I repeat, ProComp customer service has been great, and if they can get their act together with the black coating/paint on this model wheel, then I'd be a fan for life. Let's see how it goes when I'm calling for more screws and caps two more years from now... If I were to do it all over again with hindsight, I'd pick a different model wheel (still all black) without the little screw heads, so there would be nothing to have chip or peel. I hope that helps your decision.
