jamesewells
Member
So, whats the difference between the 140 and the 160?
PART# ** DESCRIPTION ** PRICE ** SOURCE
PT546-00160 ** PIONEER (SCION) Head Unit ** $220.00 ** eBay--PT546-00160
PT546-00120-CH ** Radio Harness ** $38.34 ** Amazon-PT54600120-CH
PT546-00120-AD ** Antenna Converter ** $21.96 ** Toyota Metro Parts-PT546-00120-AD
PT546-00120-MC ** Bluetooth Microphone Kit ** $76.78 ** Amazon-PT546-74120-MC
Metra 40-GM10 ** GM Antenna Adapter ** $4.94 ** Amazon-Metra 40-GM10
BAAY2F ** Antenna Y Adapter - 2 Female to 1 Male ** $4.99 ** Amazon-BAAY2F
Just wanted to add to this thread that I installed the PT546-00160 head unit in my 4Runner (non-JBL) and everything in the description below worked great. I always read about people getting cheap parts from other people or junk yard and I can never find stuff like that, except this time around. When I read this thread a couple months ago I checked online for junk yards with the head unit and to my surprise there was a mint condition one from a totaled 2016 Scion only 5 miles from my house. Super fortunate. Paid $125 for it. Got it hooked up today. I only hooked up the bluetooth microphone because I am not going to use the USB or aha app (though it looks like that might work through bluetooth). I didn't hook up a rearview camera yet either. In the future I will probably add the camera and the USB cable (USB mainly if there's a software update).
Use this site for explanation on how to get the old head unit out. How to Remove the Navigation Head Unit from a 2003 Toyota 4Runner
UPDATE: not even 24 hours in and the head unit is no longer playing audio. Everything appears to work, but no sound is coming through the speakers. Hooked the old head unit back up and everything works fine, so the problem is either the head unit or the adapters/cables. Checked the diagnostic page for the head unit and it doesn't show any failures. Does anyone have any ideas of what else to check?
I didn't have the Navi unit in mine but Ive done the swap with all the parts in the description and still works today. Check the connectors and also check the head unit pins as well.
The only thing I can figure out is that the amp IC or some chip has burned out. I hooked my old head unit up to the new harness and it played audio, so that all works. The new head unit gets HD radio signal, pairs to Bluetooth, and shows everything normal. The last thing I did on the head unit was press the voice command button, and the audio stopped and never return. I disconnected power to the head unit but all the settings persist. Not sure if there’s a way to do a hard factory reset. I did all the memory clear options available in the set up menus but it didn’t help.
Did you holding in the power knob to shut it down? My PT546-00160 has done that and it was still connected to the phone, and even pulling the power was not enough to reset it.
Affirm, on the NAV module the gray is USB and the white is the GPS. Make sure you get a gps with the right plug, a lot on eBay are for the older nav module from the older t10015 radios.
Any idea what the OEM part number for the GPS antenna might be? I can find the 2015 but that won't work for the 2016, right? Thanks!