Question about spindle knuckle help...

[jeeper1]

So I changed the CV boots yesterday and while torquing the 4 lower ball joint bolts, I busted one of the bolts and couldn't easy out the remaining bolt. I am currently running on 3 bolts on the passenger side that are torqued to spec and thread locked in. Can I get away with it, or should I change out the knuckle asap? Does anyone recommend a place, site or vendor that can sell me one for a great price? Just took it on a 80 mile trek and seemed to ride just fine. I just dont want to expect any dangers down the road and want to know what you fine folks think.

Thanks!

 

[Stick Figure]

Fix it right or replace it, would be my advice. I would either:

try to weld a nut to it,

Drill and clean it up with thread chase,

Drill it out and time sert it.

 

[jeeper1]

Thanks Stick, I will look it all up and take your advise. I just read a thread on LBJ failure and forget it. I need to do it asap.

 

[Big John]

How many pounds were you torquing to that you broke it???

 

[Singtoe]

I have a passenger knuckle that I'll sell to you for $25. Just put your stuff on it.

 

[jeeper1]

I did what was recommended. I think the torque wrench was busted.

Singtoe, If its from your 99 it should be a direct bolt on right? If so, I take it. Let me know how much shipping will be to 91765. Thanks buddy!