Rc4r Build

blcktpgsr said:
Yes besides the mounting tape on the back of the badge, there are two pins holding it in place..get the mounting tape unstuck, then just pry the badge from the location of the pins..give it a wiggle and it will come off.
Click to expand...

yeah i just broke the pins and im just gunna use addhesive to cover it up and put back on
 
Rc4r said:
Woah! i realy like that! i think i am going to do something similar to that.
what do you thing the total coast of that all is?

oh and does it move so you can get to your cargo area?
Click to expand...

I figure the cost was about $100.00, that's the cost of the 2", 1" square tubing, wheel studs, hinges, and paint. I did end up getting some freebies though. The springs for the latch pin, the latch pin itself, and the bumpers I mounted to absorb the vibrations, were all free stuff, lying around my dad's garage. I also got the licence plate bracket, nuts and bolts for free too. You could probably easily build this for $200.00.

It swings down, so you can get access to the rear cargo area with no issues. I've but all kinds of things back there since putting the carrier on, including camping gear, moving boxes, and even lumber.
P1090050.jpg~original
 
badges look great man! i didn't see if you tried the front Toyota emblem but just a heads up you'll need to take your grill off to get that one, its screwed on. I think its the same for all years.
 
GottaBeTRD said:
badges look great man! i didn't see if you tried the front Toyota emblem but just a heads up you'll need to take your grill off to get that one, its screwed on. I think its the same for all years.
Click to expand...

yeahh i got it off without taking the grill off with a small screw driver, but i decided im gunna powder coat the whole gril black so im gunna end up taking it off any ways.
 
fightman80 said:
I figure the cost was about $100.00, that's the cost of the 2", 1" square tubing, wheel studs, hinges, and paint. I did end up getting some freebies though. The springs for the latch pin, the latch pin itself, and the bumpers I mounted to absorb the vibrations, were all free stuff, lying around my dad's garage. I also got the licence plate bracket, nuts and bolts for free too. You could probably easily build this for $200.00.

It swings down, so you can get access to the rear cargo area with no issues. I've but all kinds of things back there since putting the carrier on, including camping gear, moving boxes, and even lumber.
Click to expand...

my trailer hitch is v'ed so i woul,d need a new one


i dk where im going to mount it yet. im just trying to get it out of the way so it will be easier too mount a dual exhaust.
 
finished the badges.

<a href="http://s935.photobucket.com/albums/ad198/ryanXcarter/?action=view&current=DSC_1012.jpg" target="_blank"><img src="http://i935.photobucket.com/albums/ad198/ryanXcarter/DSC_1012.jpg" border="0" alt="Photobucket"></a>

<a href="http://s935.photobucket.com/albums/ad198/ryanXcarter/?action=view&current=DSC_1011.jpg" target="_blank"><img src="http://i935.photobucket.com/albums/ad198/ryanXcarter/DSC_1011.jpg" border="0" alt="Photobucket"></a>
 
Last edited:
Little update, bought sport hood today and taking it down to get painted tomorrow. Also took all trim off and painted black. Had to get new clips from Toyota.
 
finaly some pics to update

got whole car repainted
<a href="http://s935.photobucket.com/albums/ad198/ryanXcarter/?action=view&current=DSC_0013.jpg" target="_blank"><img src="http://i935.photobucket.com/albums/ad198/ryanXcarter/DSC_0013.jpg" border="0" alt="Photobucket"></a>

sports hood!
<a href="http://s935.photobucket.com/albums/ad198/ryanXcarter/?action=view&current=DSC_0014.jpg" target="_blank"><img src="http://i935.photobucket.com/albums/ad198/ryanXcarter/DSC_0014.jpg" border="0" alt="Photobucket"></a>
(nsert still drying)
no more ugly silver trim
<a href="http://s935.photobucket.com/albums/ad198/ryanXcarter/?action=view&current=DSC_0017.jpg" target="_blank"><img src="http://i935.photobucket.com/albums/ad198/ryanXcarter/DSC_0017.jpg" border="0" alt="Photobucket"></a>


led dome and map lights
<a href="http://s935.photobucket.com/albums/ad198/ryanXcarter/?action=view&current=DSC_0018.jpg" target="_blank"><img src="http://i935.photobucket.com/albums/ad198/ryanXcarter/DSC_0018.jpg" border="0" alt="Photobucket"></a>

<a href="http://s935.photobucket.com/albums/ad198/ryanXcarter/?action=view&current=DSC_0019.jpg" target="_blank"><img src="http://i935.photobucket.com/albums/ad198/ryanXcarter/DSC_0019.jpg" border="0" alt="Photobucket"></a>

finaly trim is painted and began puting back on
<a href="http://s935.photobucket.com/albums/ad198/ryanXcarter/?action=view&current=DSC_0016.jpg" target="_blank"><img src="http://i935.photobucket.com/albums/ad198/ryanXcarter/DSC_0016.jpg" border="0" alt="Photobucket"></a>
 
THEREALTOR1 said:
How do you like those Silverstars Rc? Got any pics of what they look like, and have you noticed much of a difference in actual illumination?
Click to expand...

Not to big of diffrence when just driving. but when you flip the brights on there is a huge diffrence.

but i think im gunna do a projector retro fit any ways
 
Rc4r said:
Not to big of diffrence when just driving. but when you flip the brights on there is a huge diffrence.

but i think im gunna do a projector retro fit any ways
Click to expand...


Hmm, maybe better to save my money and put it towards a conversion kit then. Thanks for the feedback.
 
trim finished!
<a href="http://s935.photobucket.com/albums/ad198/ryanXcarter/?action=view&current=DSC_0024.jpg" target="_blank"><img src="http://i935.photobucket.com/albums/ad198/ryanXcarter/DSC_0024.jpg" border="0" alt="Photobucket"></a>

next is the grill
 
Looks great man! I've been pondering a color change, but can't afford one anyway! HA HA HA! I've always like the Charcoal Color that the New Taco's have.....
 
You must log in or register to reply here.

Members online

Total: 350 (members: 3, guests: 347)

Forum statistics

Threads
278,308
Messages
3,554,058
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top