• If you plan to post to Classified forums, you must follow these rules, or your post will be deleted.

    1. Thread title must include at a minimum: FS or FT, Item(1st, 2nd, 3rd, 4th or 5th gen), Price and Location. For Example: FS: 4th GEN Carpet Floor Mats - Tan, $50 Denver, CO.
    2. All Threads must contain the following information
      • What is for sale/trade (model, specs, etc.)
      • Condition
      • Price/What you want to trade for
      • Location of item
      • At least one picture of the item for sale or for trade
    3. No "Feeler" Threads - Its either for sale or it isn't.
    4. Moderators lock Classified Threads that have not had any activity in 90 days or when the part is announced SOLD.
    5. Threads not complying with the rules will be deleted without notice.

RCI Group Buy - CLOSED

Status
Not open for further replies.
JZiggy said:
Cool, thanks for the followup on that! Sounds like this makes the aluminum vs. steel option an easy decision.
Click to expand...

Sure. There are less expensive options (around $550) for the same coverage, but bare metal. For those who want powder coating, for 90 bucks more, a good deal...

Also, at 96 lbs for all three, for those who care, likely very few, this seems to be the lightest of the options out there in 3/16" steel. Just about a 5-10 lb delta...

Just spoke with Tim. Lead time is about 2-3 weeks currently. Not that bad.

Ordered. With my current schedule, I like not having to dork-around with the time needed to degrease and paint, or having them sit unpainted for a while...

Thanks Mike.
 
Last edited:
Just placed my order. I got all mine raw aluminum...ok to leave raw right? I don't care to pay for it to be powder coated as long as there's nothing wrong with it besides aesthetics.
 
joshp767 said:
We didn't actually raise the price of the transmission skid plate technically. There was a $25 option for gussets that bolt on to the center of the plate and since we literally sell them 100% of the time with that part we raised the price the $25 and now they come by default, but doing it this way we can now weld them in which is even better.

As for the Front skid plate, the price did go up $20 due to two factors:
-We made some AWESOME (but costly) upgrades to improve the plates recently
-Steel and Aluminum material prices went up 30-60% over the last MONTH

This of course was going to happen regardless of the GB, and we chose to adjust pricing only on the front as of now, both for the sake of you guys and because we are trying to hold out as long as possible without doing anything more substantial like many other vendors are having to do.
Click to expand...

So, in 11/2016 I bought this:
1 | T4R-03-09-02-V8-14AL-BM | 03-09 4Runner Transmission Skid Plate | 11/23/2016 |
Vehicle Model: 4.7L V8 Motor
Material: 1/4" 5052 Aluminum
Finish: Bare Metal
Did I buy the gusseted version? Guessing not. Dont remember it being an option (that's a problem with my memory nothing else).
 
All ordered! Full skid package raw aluminum, gas tank skid raw aluminum, and lower link skids. Sweet! Thank you for the GB!
 
joshp767 said:
We didn't actually raise the price of the transmission skid plate technically. There was a $25 option for gussets that bolt on to the center of the plate and since we literally sell them 100% of the time with that part we raised the price the $25 and now they come by default, but doing it this way we can now weld them in which is even better.

As for the Front skid plate, the price did go up $20 due to two factors:
-We made some AWESOME (but costly) upgrades to improve the plates recently
-Steel and Aluminum material prices went up 30-60% over the last MONTH

This of course was going to happen regardless of the GB, and we chose to adjust pricing only on the front as of now, both for the sake of you guys and because we are trying to hold out as long as possible without doing anything more substantial like many other vendors are having to do.
Click to expand...



Hi I’m wondering what upgrades were made to the front skids. I just purchased the front skid along the radiator gap piece.

Thanks


’14 White Trail,Ecotechne rack,XenonDepot HIDS,Nfabs
 
joshp767 said:
We didn't actually raise the price of the transmission skid plate technically. There was a $25 option for gussets that bolt on to the center of the plate and since we literally sell them 100% of the time with that part we raised the price the $25 and now they come by default, but doing it this way we can now weld them in which is even better.

As for the Front skid plate, the price did go up $20 due to two factors:
-We made some AWESOME (but costly) upgrades to improve the plates recently
-Steel and Aluminum material prices went up 30-60% over the last MONTH

This of course was going to happen regardless of the GB, and we chose to adjust pricing only on the front as of now, both for the sake of you guys and because we are trying to hold out as long as possible without doing anything more substantial like many other vendors are having to do.
Click to expand...

Are the gussets something can be added on after the fact? I have your aluminum 5th gen plates already.
 
Transfer Case Skid

Has anyone does the exhaust pipe re-route. Does RCI Make the Transfer Case skid for those that have re-routed for the 5th gen? I know they do one for the Tacoma.
 
12Bravo4R said:
Directly from their website:

KEY FEATURES
•Service openings for easy service and oil changes without removal
Click to expand...

I read that, but from the looks of them, I just see a spot for what looks like the oil plug and trans plug access. So you technically could change the oil with it in place, I’m just wondering about changing the filter too.
 
Status
Not open for further replies.

Members online

Total: 411 (members: 3, guests: 408)

Forum statistics

Threads
278,316
Messages
3,554,111
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top