imdtucker
New member
I figured we should probably get a new thread going here instead of piggy-backing on the Spring GB thread.
Reposted from [MENTION=90834]joshp767[/MENTION]:
Alright, lets do it.
So here is the deal, I am going to use the same coupon codes to be used through our website as the last group buy, which are:
T4Rgroupbuy15 if your purchase total is under $450. This will give you 15% off of your order.
T4Rgroupbuy20 if your purchase is over $450 (before discount). This includes all full skid packages, etc. that add up to this amount, and is good for 20% off.
As per usual on these group buys, expect items to be shipped within 2-3 weeks though we will make every effort to start shipping them out immediately.
Thanks and feel free to call if you have any questions!
Additions:
- If you are buying a full skid package, they are already discounted at 10% (from $545 down to $490 for a 4th gen set). To use the T4R code, add the 3 plates separately (total should be $545) then apply the code and receive your 20% off!
- Codes will work until Sept 1, 2014
- No minimum quantities.
A huge thank you to Josh!
Reposted from [MENTION=90834]joshp767[/MENTION]:
Alright, lets do it.
So here is the deal, I am going to use the same coupon codes to be used through our website as the last group buy, which are:
T4Rgroupbuy15 if your purchase total is under $450. This will give you 15% off of your order.
T4Rgroupbuy20 if your purchase is over $450 (before discount). This includes all full skid packages, etc. that add up to this amount, and is good for 20% off.
As per usual on these group buys, expect items to be shipped within 2-3 weeks though we will make every effort to start shipping them out immediately.
Thanks and feel free to call if you have any questions!
Additions:
- If you are buying a full skid package, they are already discounted at 10% (from $545 down to $490 for a 4th gen set). To use the T4R code, add the 3 plates separately (total should be $545) then apply the code and receive your 20% off!
- Codes will work until Sept 1, 2014
- No minimum quantities.
A huge thank you to Josh!