Rear airbag questions

[confyushus]

I bought a hitch mount carrier for my dirtbike so naturally the rear sags a decent amount (superflex coils, extended bilsteins). I know that using the toytec airbags will help tremendously, but how are they off road? I will be carrying my bike and gear a good bit so the bags will be used a lot, but I also go offroad a good bit unloaded and am worried about pinching one or something like that while flexing the rear. Does anyone have any experience with this or any recommendations?

 

[Snowy21]

Just pull the valve core out if the full port and you're good. Did that with no issues for a couple years

 

[02_SE_Runner]

When you're not hauling deflate them a bit (so you still have bump stops). I run them, you should be fine.

 

[confyushus]

Ok, thanks guys. I planned on deflating them unless loaded down, but I guess was just worried about the bags getting caught between the coils when one side is stuffed. They must be more rigid when deflated than I am thinking.

 

[02_SE_Runner]

They actually fit all the way inside until they are inflated. When they are inflated that is when the bags pushes itself out of the coil creating a "lift".

 

[confyushus]

Ok, that makes a little more sense as to how they would be safe inside the coils. Thanks for the help! My kit is on the way!