Rear Bumper with Modular Swingouts NOW AVAILABLE! NEW VIDEO

[KWSRStorm]

If i just install the bumper with the driver side swingout (for use with a dual jerry can holder) will that block the backup camera?

Sent from my SM-G973U using Tapatalk

 

[Victory 4x4]

If i just install the bumper with the driver side swingout (for use with a dual jerry can holder) will that block the backup camera?

Sent from my SM-G973U using Tapatalk

The camera is further to the driver side, so a driver carrier would block the camera. A passenger side carrier without a spare on it shouldn't block much of the camera view.

 

[KWSRStorm]

Oh good to know!

Sent from my SM-G973U using Tapatalk

 

[PK930]

Y’all ever find out if it’ll clear a ladder?

Do y’all have finish pic with just the tire carrier installed? I ask as some look naked with just one side dome.

Thanks and looks great!

 

[Victory 4x4]

Y’all ever find out if it’ll clear a ladder?

Do y’all have finish pic with just the tire carrier installed? I ask as some look naked with just one side dome.

Thanks and looks great!

A carrier on the ladder side probably won't clear, but you could run the right carrier and the ladder. We also plan to make a carrier mounted ladder for those that want two carriers and a ladder!

I don't have photos of a single carrier yet but I will post when I do.

 

[halflife78]

Can the Jerry can holder work on the roof rack?

 

[Victory 4x4]

Can the Jerry can holder work on the roof rack?

Yes!

 

[Victory 4x4]

2 questions.

1. If I decide on the 2 Jerry can mount will the high lift mount still fit beside it on the left swingout?

2. Will the rotopax mount fit a 4 gal rotopax on both side of the mount rather than 1 rotopax and a set of maxtrax.

My goal is to maximize fuel carrying capacity for a long remote trip I'll be taking next year.

Thanks,
Brandon

The answer to both is yes!

 

[Victory 4x4]

A few photos of the dual jerry can mounts

 

[Off-Camber]

t

The answer to both is yes!

Excellent, thanks for the time in checking it out for me.

 

[Victory 4x4]

Overview video of the bumper and carriers! Plus the cutting portion of the install. Full install video coming soon!

<iframe width="560" height="315" src="https://www.youtube.com/embed/NdyZYKhj6oo" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

 

[dktxt4r]

Overview video of the bumper and carriers! Plus the cutting portion of the install. Full install video coming soon!

<iframe width="560" height="315" src="https://www.youtube.com/embed/NdyZYKhj6oo" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Would the cut be the same for a Limited rear bumper?

 

[dktxt4r]

Would the cut be the same on a Limited bumper?

 

[Victory 4x4]

Would the cut be the same on a Limited bumper?

Yes, the cut would be the same, but the backup sensors will not be retained with the bumper.

 

[dktxt4r]

Thanks!

 

[agentcross]

Stupid lighting question. Are people mosty mounting LEDs on their bumpers as driving lights? Mounting to a switch for pure offroad/overland reasons?

 

[Victory 4x4]

Stupid lighting question. Are people mosty mounting LEDs on their bumpers as driving lights? Mounting to a switch for pure offroad/overland reasons?

On the rear, you can wire them to your reverse lights and/or a switch as well.

 

[KWSRStorm]

Love the modularity!

Sent from my SM-G973U using Tapatalk

 

[Off-Camber]

Yes, the cut would be the same, but the backup sensors will not be retained with the bumper.

Awesome. However, can you give us a different reference point measurement in the rear vs side? The limited version and/or earlier models have a softer more rounded transition under the tail lights. The measurement in your video at 2.25" up under the tail light is measured from a hard distinct line that the earlier 5th gens and limited version doesn't have. Could you possible give a measurement downward from the body line under rail lights vs up from the hard line on the bumper.

Make sense? If not I can get a few pictures up for explanation.

Thanks,
Brandon

 

[bleaches]

Dang it. I was hoping that this bumper swingarm will work with my gobi ladders. Loving the look of the bumper btw.