Rear cargo panel removal (where sub would go)

[Northern 4Runner]

Been looking and looking for a how to on the removal of this rear passengers side panel in the cargo area. I attached a picture of the one I'm talking about. If anyone could help me out that would be awesome!:hello:

 

[SnowTrail]

I don't know how to do it on that panel per se but I've removed other panels, and you really need a set of thesehttps://www.amazon.com/gp/aw/d/B00HNMLQAG/ref=mp_s_a_1_1?ie=UTF8&qid=1485921632&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=plastic+pry+tool&dpPl=1&dpID=41yJY3flrWL&ref=plSrch if you don't want to scratch the hell out of the plastic!

 

[Jhalko]

These might help...

http://www.toyota-4runner.org/5th-gen-t4rs/196631-passenger-rear-cargo-sub-panel-tear-down.html

http://www.toyota-4runner.org/5th-gen-t4rs/163311-cargo-area-panel-removal.html

http://www.toyota-4runner.org/5th-gen-t4rs/81748-removing-interior-panels.html

 

[Northern 4Runner]

Thanks. I ordered a 4 piece trim removal tool set off amazon, $3.18 and free shipping.

I'm looking to gain access for applying rust check to the interior of the rear quarter panel. The jack access panel on the drivers side allowed me access there. Not sure if my 3' extension wand will reach all the way from the tail light access. Too bad the storage bins on top of the wheel wells have those 2 hidden screws holing them in. Would popping the trim for the 400watt outlet let me snake my extension wand into the quarter panel area? Trying to avoid what looks like a fair bit of tear down if I don't have to.

Worse case scenario maybe drill a hole in plastic trim down low and put a rubber plug in it after I'm done.

 

[97BlackAckCL]

I made a diy guide for this since none of the links provided details or pics, my diy guide is here

http://www.toyota-4runner.org/5th-g...cess-rear-panel-pocket-subwoofer-install.html