Rusted out front skid plate

[Jeff614]

Hi everyone, been awhile, life goes by fast... couldn't believe I was catching up on some service at 90000 already!

Anyway, while underneath doing a fluid change out this weekend I noticed the front skid plate is crumbling away in rust. Live in Northern VA so usually little snow, salt, etc... Rest of undercarriage looked good for 90K miles as well. I was shocked, never expected to see that level of rust :wow2:

Dealer quoted $208 for the stock one which seemed pretty good, I'm having trouble finding that part number. I got 51405A online but can't find any (so far) in stock or cost. They also quoted the TRD Aluminum plate for $276... on order.

I'm tempted, TRD and it's aluminum, but my winch bumper requires removing the "tabs" the plate swings down on.

Finally my real question is what say you if you were on a budget? Finances are tight right now with school and work. Just wondering if I'm overlooking something, even in finding a stocker...

Thanks all,
Jeff

 

[Gclark949]

Why not just go with an aftermarket brand. My Bud Built skid is 1000x better than the OEM tin foil piece of...

 

[Charlievee]

First question do you use it? Very few people do anything that would require a skid plate. If money is an issue, get a stock one that someone is tossing. Lfd off road starts at 179.00

 

[Jeff614]

First question do you use it? Very few people do anything that would require a skid plate. If money is an issue, get a stock one that someone is tossing. Lfd off road starts at 179.00

Really don’t need an upgraded version. Stocker has been fine for the wheeling I do and that’s decreased a lot lately.

Price is really the largest factor. RCI and Schrockworks are waaaay to much. Will definitely check out LFD, thanks!

Anyone have the correct part # or even by chance have a take off they wanna get rid of?

Thanks everyone,
Jeff

 

[zcruiser]

Even if you don’t wheel, it’s nice to do some armoring of your undercarriage. I’ve hit a few things over the years with all the miles and it’s always good to have a little more protection to minimize damage.

 

[DavidR1]

If you poke around local social media 4Runner pages in Nova you're bound to find one. This is the first thing that many people ditch.

To order one, the shipping will get you. I'd attempt to find one local to you.

 

[Jeff614]

If you poke around local social media 4Runner pages in Nova you're bound to find one. This is the first thing that many people ditch.

To order one, the shipping will get you. I'd attempt to find one local to you.

Precisely what I’m hoping/looking for. Seen a few on eBay and w/shipping it’s more than the dealer.

Trust me, I get the added bonus the thicker ones give, and or the rust free worries of aluminum... it’s simply not in the budget.

 

[90Duck]

I've got one sitting under my stairs doing nothing that I would happily donate to your cause for the cost of shipping, but I can't imagine shipping it across the country would make much financial sense from Oregon to NOVA

 

[tm965]

If you poke around local social media 4Runner pages in Nova you're bound to find one. This is the first thing that many people ditch.

To order one, the shipping will get you. I'd attempt to find one local to you.

which pages? id love a gas tank skid

 

[DavidR1]

which pages? id love a gas tank skid

Unsure where in VA you are, there is a RVA Toyota Trucks FB page. Unsure if there are others, I'd assume there are beach area and NOVA pages.

 

[the_fornicator]

I'd search locally + used. Most people ditch the OEM one for $50.

 

[tm965]

Unsure where in VA you are, there is a RVA Toyota Trucks FB page. Unsure if there are others, I'd assume there are beach area and NOVA pages.

in nova

 

[2112 R]

I'd search locally + used. Most people ditch the OEM one for $50.

^^ This. If you're on a tight budget check the classifieds here or via one of the local regional groups here:
https://www.toyota-4runner.org/4runner-and-hilux-surf-clubs/
There is a parts section in each of them and maybe you can find a local 4runner owner who is looking to clean out their side yard after upgrading armor.

I sold mine for a cup of coffee and a doughnut and even met the guy half way between his house and mine. I just wanted to get rid of the thing and find it a new home. You'll be able to find something for sure.

If the dealership is quoting you +$200 and you're seriously thinking of paying that, I would suggest saving up another $100 and just get an RCI or something.
10-19 4Runner Front Skid Plate – RCI Offroad

 

[sn_85]

As others have said, look on craigslist. I practically gave my skids away or actually did give them away for free. Try your luck there.

 

[Deep_palancar]

Part Number

the part number is 51450 60050

There's a salvage one on EBay now for $130ish shipped
Or McGeorge Toyota will ship you new one for ~$170

 

[Charlievee]

Time to visit a pic n pull. I recall a few in va. I kind of miss walking the bone yards.

 

[Jeff614]

Thanks Deep_palancar for that part #. Just wanted to double check.

Thanks to you all as well for your responses. I drive a wrecker all day, makes checking much less replying tough. Ironically first call was a guy with a TRD Pro in a parking garage. Got to take a look at his skid. Even better it would look much cleaner with my bumper setup... so there's that plus.

Will check out some of your recommendations as well. Those of you kind enough to offer yours, my thanks! You are most likely right and anywhere out of the region would probably be cost-prohibitive to ship however.

For now I'll wait. Look online, both social media and craigslist. Keep my eyes open and hope one pops up or a different option presents itself. Wish I could upgrade...a lot of things. With tires due soon and money tight, best I hang on for a little while.

Appreciate all the thoughts, any and all are much appreciated!

- Jeff

 

[Bill_Sanderson]

I have a new 2019 SR5 Premium. Before that, I had a 2006 4th gen, which had severe corrosion on the frame and suspension components. I managed the rust as best I could. Replaced many, many components and did other work on the frame, but it was a losing battle. So, I gave it up and acquired the 5th gen. I’m surprised (and concerned) to hear that your skid plate rusted out completely. How is the frame doing?


Sent from my iPhone using Tapatalk

 

[Jeff614]

I have a new 2019 SR5 Premium. Before that, I had a 2006 4th gen, which had severe corrosion on the frame and suspension components. I managed the rust as best I could. Replaced many, many components and did other work on the frame, but it was a losing battle. So, I gave it up and acquired the 5th gen. I’m surprised (and concerned) to hear that your skid plate rusted out completely. How is the frame doing?


Sent from my iPhone using Tapatalk

Strangely it’s really only the skidplate. Got a good look changing the t-case and axles. Other than that piece, everything looks pretty much as it should for 90k miles and trails it’s been down. Given the design, I wonder if failing to get ice/salt/snow out in a timely manner contributed. The difference in weird angles and crevices between the stocker and even the TRD is crazy.

I’ll post some pics after work so it’s easier to see the condition and area of damage.

- Jeff

 

[Bill_Sanderson]

Thanks, Jeff. I do live in a region where snow, ice, and road salt usage is commonplace. I tried to mitigate the corrosion as much as possible, but it was a losing battle. In any case, I’ve moved on to a new 4Runner. Hopefully the corrosion won’t be as much of an issue as paint, coatings, and metal treatments are likely to have advanced/improved since 2006.


Sent from my iPhone using Tapatalk